Poll: How much would you pay for a broken radio? - You do not have permission to vote in this poll.
$10 or less
8.33%
2
8.33%
$20
8.33%
2
8.33%
$30
0%
0
0%
$40
8.33%
2
8.33%
$50 or more
75.00%
18
75.00%
* You voted for this item. Show Results

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Radio poll
#1

Try voting for the poll i personally would never spend more then $40. But it would have to be rare or I wouldn't buy it.
#2

It would really depend on the total condition, rarity, and such of the radio to put a price on it. About ten years ago I could pick up about any console radio I wanted for around 10-20 dollars (except Zeniths of course! Icon_mad ). Now the prices keep spiking up and down. Ebay ruined alot of the good deals as people quickly became "ebay experts". Icon_sad

No matter where you go, there you are.
#3

yea i know what you mean Icon_mad
#4

All the radios I buy are broken in someway and I payed more than $50 for most of them.
Steve

M R Radios   C M Tubes
#5

Depends greatly on the radio. 50 is nothing these days for a decent, interesting radio, working or not.
#6

yea there getting more and more hard to find Icon_sad
#7

Broken and non working are I suppose two different issues, but if it was what I was looking for........Yeah, I'd throw down 50 or more, sure, why not? Icon_biggrin

tractorforum.com *** I reserve the right to be wrong
#8

I paid $50 for a floor console that was realy beat up... but I realy wanted a console piece. With a lot of work it turned out great.

Mostly I have to wait for an opportunity in the $10-20 range, but I still have fun with what I find.

Dave Casazza
Keep em glowin and goin...
#9

My current limit is under $50 delivered. That way if I get something hoplelessly gone, it's not a big bite.
#10

I think Bill (exray) and Jayce said it for me. It depends greatly on the radio in question, its condition, etc. You can expect to pay a LOT more than $50 for a non-working Philco 90 cathedral, as an example.

--
Ron Ramirez
Ferdinand IN
#11

Or a late-model Radiobar if there's any glassware at all. Icon_eek
#12

Broken in what way, and what radio?

Web site: http://www.masekconsulting.net
Radio Photos: http://www.photobucket.com - album id FStephenMasek
#13

Broken all over or broken in pieces, just pieces of broken radio, or broken into pieces of radio all broke up from pieces broken off piecemeal? (Bear with me guys, won't you? I just survived an MRSA infection which could've 86'd me, according to the local medical oracles, and I've just paid out what I hope is the last of $5300 in medical bills. HIC!)

I bought a Zenith 6S362 for $20 with a badly broken dial glass, dial itself in very good condition, and faded ripped grillecloth, but all the knobs were present, making it worth the price, to me, for the knobs themselves. Chassis is clean and the speaker. My Zenith 7S240 needed the two "Pinched" lower knobs and one on the top of the triangular bezel. I have a 7S261 which needs two pinched lowers, and the "hat" upper, so I could outfit the '261 at the expense of the '240, which lacks the speaker. Do missing parts constutute the "broken" aspect of a radio in our definition? Both the '240 and '261 came into my possesion with only (1) correct knob, (1) of the "pinched" ones. Should I just go back to my 7&7 & fail to forget not remembering to soak my head overnight?

Dialog from episode of Gilligan's Island:

Skipper: "How did the radio get broke?"

Gilligan: "I don't know, skipper, it's just one of those things!"

Skipper: "One of what things??!!!"

Gilligan: "One of those broken radio things?"
#14

Another example of a "broken" radio:

I just picked up a Philco 52 grandfather clock. Just like the 570 except its front panel was drilled for three shafts instead of four, so that the 52 chassis will fit. It also has a different escutcheon (again, 52 instead of 70). These are extremely rare, with only two (so far) known to exist including this one. The only other one I am aware of is in a private collection. There are probably some others out there that have survived, but have not yet "come out of the woodwork," so to speak.

I paid $175 for this set, and it needs a fair amount of woodwork; the veneer on the front panel is delaminated and cracking at the top, and a chunk of wood is missing on the bottom left foot. But for what it is, I am happy with my purchase and do not feel I "overpaid" at all.

Now if you mean "broken" as in seriously broken cabinet, I saw a Philco Hippo (46-420) yesterday, with a chunk broken out of the side and a nice big crack around it from top to bottom. It also had some overspray from where someone had been spray painting something close to it at some time. $29.50. I passed.

--
Ron Ramirez
Ferdinand IN
#15

Got to agree with several of you. Depends on what it is. There was recently a 16B tombstone on eBay in HIDEOUS condition both cabinet and chassis wise that still went for over 50.00. If it is somthing I am looking for, or have the parts for, or have the expertise to fix, then I will consider going after said non working radio.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A5...MrFixr55 — 06:48 AM
American Bosch Model 802 auto radio
I think it would come under either American Bosch or United American Bosch. American Bosch made sets for the American We...Arran — 05:53 AM
trying to identify this wire type
Thanks to all for the feedback. As Arran said, it is probably an older replacement and yes it has a grid cap so I will ...georgetownjohn — 09:32 PM
trying to identify this wire type
It's possible that the red wire, actually a grid cap lead, is a very old replacement, I can't remember seeing a pre 1939...Arran — 09:18 PM
Gilfillan Brothers Car Radio?
Hi everyone,  Special thanks to Joe Rossi for tracking down this obscure radio and thanks to others who took up the hun...Antipodal — 08:15 PM
trying to identify this wire type
Here's one source for your wire of many. Take care and BE HEALTHY! Gary P.S. Can't get the right color you need? I ...GarySP — 06:40 PM
trying to identify this wire type
...and modern wire of the appropriate gauges and insulation V-rating (300V minimum, usually shown right on the wire) is ...morzh — 05:47 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
I have a question about this radio, is there anyone that has access to this radio that has an intact unmolested speaker ...captainclock1988 — 04:28 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Well what makes me confuse all of those companies is that all three of those companies (Setchell-Carlson, Stromberg-Carl...captainclock1988 — 04:21 PM
trying to identify this wire type
The red wire is rubber covered wire. The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM

[-]
Who's Online
There are currently 5997 online users. [Complete List]
» 1 Member(s) | 5996 Guest(s)
Avatar

>