Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Detrola 568-1
#1

Thought I would post a separate subject for the pictures of this radio and what little I have found out about it so far. Yeah, it's orange, but seeing the cleaned up rust and where the paint has peeled around the speaker inside the cabinet, I have a feeling this thing was rather rusty when found. Luckily, the chassis appears rather clean.

Ok, I found a couple references on the other forum that these were supposedly developed for the military as a rugged troop radio, but the war ended the contract was cancelled. I guess several units were already produced, so they were sold to the public. If you have one with the handle, the hammertone finish, and the components were wax coated under the chassis, it is supposed to be one of the units originally intended for military service. Well, mine seems to tick all those boxes. The handle is there, it was hammertone finish and some of that is still there, and it seems what few undisturbed components and wiring I can see under the chassis is wax coated.

So, I guess this was intended as a 'Morale Radio' and I must admit, it was worth the $30 I spent on it. Really seems to be a good radio and definitely is not going to get hurt easily. Now, if I could only find a complete Minerva Tropic Master to go with it. I've seen some parts ones of those over the years and think they are neat too. Icon_smile

     

   

No matter where you go, there you are.
#2

Here you go, eye candy..............

https://radioattic.com/item.htm?radio=1090731

Paul

Tubetalk1
#3

Nice eye candy, but they are on drugs on the price! Even eBay can't get near that price out of them. There used to be one buried in a junky antique mall near me until at least last month. I could see the radio, but literally could not get to it!

No matter where you go, there you are.
#4

In fairness to Joe, he found that, bought it, spent a lot of time restoring it, he does A#1 work, new wiring, all caps, extra clean, he is the real deal. He may be one of the best techs I know. So while price is high for us guys, for the Attic it is probably OK. 

We want to buy and do our own work, though maybe not all the time. Joe is OK.  Icon_wink

But I hearze ya' Jayce.  Icon_smile

Paul

Tubetalk1




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
My Philco 37-116 Restore
Hello MrFixr55, Thank you for taking the time to explain. I measured 50 volts where you say. Today the 370 volts at ...dconant — 12:51 PM
462ron
Oh that sucks. It’s something easily overlooked. Hopefully it’s nothing more than a resistor! Ron462ron — 08:08 AM
Philco 46-480 Electronic Restoration
Just confirmed that you are correct. It’s the function generator. I connected the signal output probe to one of the inpu...jrblasde — 07:52 AM
Philco 46-480 Electronic Restoration
Ouch, you may be right. Yes, it is solid state. It’s the signal output of my oscilloscope. May be time to crack that ...jrblasde — 07:27 AM
462ron
If you didn’t put a DC blocking cap between the signal generator probe and the plate of the 1st IF it’s possible you ble...462ron — 07:07 AM
My Philco 37-116 Restore
Hi DConnant, The reason why C127 is isolated from ground is because sets of this vintage did not have the center tap...MrFixr55 — 01:07 AM
Philco 46-480 Electronic Restoration
The shield is on the 6H6. It was, in fact, a missing jumper to connect the main chassis ground to the RF chassis grou...jrblasde — 10:58 PM
Zenith H725
When dealing with noise on power lines, time to get my Jackery 240 out. Talk about clean can hold a portable am radio ne...David — 08:52 PM
Zenith H725
Arran - I bet you're right probably vinyl, there was no rubber smell when desoldering it, which you often get with the o...EdHolland — 08:23 PM
Zenith H725
Ed; It was very likely vinyl covered wire given the vintage of the set, there was some rubber/gutta percha wire used ...Arran — 06:34 PM

[-]
Who's Online
There are currently no members online.

>