Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
So, here are some pictures.....
I need one small knob
The front is bowed out a little
Here's the underside
will post more of the backside when I get the chance...
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
If you want to replace any of the cabinet parts like the baseboard or front panel give Steve Davis a holler. Does great work and prices are reasonable. Mine needed a front panel, baseboard, rear arch, and base trim.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
Here's some more, of the back; uncleaned as found condition of course...
Wonder what that hole is for on the top arch?
notice that shim (on right side only) holding the chassis up?
the shaft holes in the front are not centered, wondering whats going on!
lots of tree leaves and junk
the 3 tubes left to right are 45, 80, and UX-245
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
I'd have a look at this instead of the Rider's:
https://philcoradio.com/library/index.ph...-model-21/ It's more accurate and comprehensive.
GL
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 1,906
Threads: 143
Joined: Jan 2013
City: Westland, MI
Congratulations! Finding a model 21 is almost like winning the lottery. They had a very short production time, giving way to the 70 and 90 models. Worthy of restoration regardless of the "found" condition. Take care, Gary
"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
(04-18-2019, 04:13 PM)Radioroslyn Wrote: I'd have a look at this instead of the Rider's: https://philcoradio.com/library/index.ph...-model-21/ It's more accurate and comprehensive.
GL
thanks, I will! haven't fully explored this site yet!
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
(04-19-2019, 10:50 AM)GarySP Wrote: Congratulations! Finding a model 21 is almost like winning the lottery. They had a very short production time, giving way to the 70 and 90 models. Worthy of restoration regardless of the "found" condition. Take care, Gary
Yes! you know what they say; even a blind squirrel....finds a nut once in a while! I intend to restore carefully, and not overdo it...my son will do the cabinet work, and I will stumble through the electrics....
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
The 21 is more or less the 20 that looks like the 70.
More so, the early run used the 20 chassis.
So most of its value is in is rarity rather than the performance or the looks.
I wouldn't mind having one to enhance the early Philco models line I have. But I know exactly how it's going to sound.
![Icon_smile Icon_smile](https://philcoradio.com/phorum/images/smilies/icon_smile.gif)
Cause I got the rest of them.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.