Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Atwater Kent/Kiel Table Radio
#1

Offer accepted.  Now I own this Atwater Kent 55C in the Kiel table.  It'll have to sit for a while since i have too many other projects in process and another big one to start soon.  Radio and cabinet are not in bad condition.

               


Attached Files Image(s)
   
#2

Congratulations! Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#3

very cool!!  would you mind scanning that AK documentation (or if its pasted to the frame, photograph it close up)?  I have the same table and radio.  Congrats!
#4

Me too on the pink paper.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

I presume you're talking about the pink colored instruction sheet?  I will remove it as it is held in place by only 2 staples which I will want to remove anyway.  Then I can scan it for you.
#6

Congratulations, those are a unique piece of furniture and radio rolled into one Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

I have a HiRes scan of the installation instructions but i don't know how to upload a multi megabit file.  if you guys want to pm me your email addresses, I can email it to you.  or I can upload it to DropBox.
#8

Here is a link to Google Drive for a High Resolution copy of the instructions (for those who wanted it.)

https://drive.google.com/file/d/1YSdKfmn...uthah/view




Users browsing this thread: 5 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently 6784 online users. [Complete List]
» 1 Member(s) | 6783 Guest(s)
Avatar

>