Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

record plays at 78 but not 45
#1

Hello,

Just found a cool old 50-1721 in a basement.  I'd love to use it.  It gets a hum at high volume.  It turns but no sound unless its set at high rpm so you hear chipmunks but no sound at the correct speed.  Any ideas?

z
#2

Hi Zeb and welcome to the Phorum,
Several thing come to mind. Would service the chassis by testing tubes and resistors replace foil/paper caps along w/ eletrolyics. This will give you a good starting point to do any further troubleshooting.
The turntable give it a mechanical cleaning and lub. Not uncommon to find deteriorating rubber parts (driving the platen) that will need replacement. Another common issue is a weak cartridge (low output) and low tracking pressure.
After 69yrs these sets aren't a plug and play unit any more.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry
#3

Thank you very much... so far that is all a mystery to me so I'll start looking into how to do all that.  I'd love to get it working again.
#4

Whatchu got against chipmunks?!   Icon_lol
#5

Nothing really I just don't chipmunks in my vintage pre-chipmunk turntable
#6

Icon_lol    HA!   ok bud.
Terry is good , smart help.  There's lots of good help here.
#7

Nah just don't have a life.[Image: https://philcoradio.com/phorum/images/sm...on_lol.gif]

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got it!

Terry




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM

[-]
Who's Online
There are currently no members online.

>