Posts: 111
Threads: 24
Joined: Oct 2016
City: Whitehall PA
Hello,
So I just bid on and got this 37-116. Couldn't help myself, a cabinet that doesn't need work...
https://www.ebay.com/itm/Philco-37-116-C...7675.l2557
The question is; do I drive ~7+ hr round trip to get it or do I have it shipped? I'm certain it will fit as I have managed to tote a 37-690 in my VW Golf (hatchback). I would remove the chassis, but leave the speaker in place with the radio loaded on its back. But I also understand he packs well for shipping and the nearest Greyhound terminal is about 10 miles away, a shorter drive. Opinions?
Is the Radiodaze grill cloth below a match for this radio? It sure looks like it is.
http://www.radiodaze.com/grille-cloth-03...c03-18x25/
Can't think of anything witty.
Greg O.
Whitehall, PA
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
I drove for it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Great radio! I guess it depends on a few things. Are you up to the round trip drive? Do you have some help to unload the case when you get home? Do you REALLY trust that the unit will be packed well and arrive as safe as it would if you transported it? Is the cost of shipping it justified? All that considered, if you go pick it up, be sure to bring some thick blankets to wrap it in before you put it in your car to prevent marring the cabinet. I look forward to hearing about your adventures restoring the electronics.
Posts: 1,190
Threads: 50
Joined: Oct 2017
City: Allendale, MI
If it were me, I'd drive. I've done it for less. Great looking radio. I have one in similar condition that works VERY well. Now I have a second that needs a lot of work. Congrats!! Fun project. I have a thread here on my restoration.
(This post was last modified: 10-01-2019, 09:59 PM by rfeenstra.)
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
The price is surprisingly low for one of Willie's radios. Considering those usually have great cabinets, I expected a bit more.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
In ANY case, and I am sure that you already know. BUT the chassis is poorly secured at best. Unless the radio receives very careful handling, it should be removed for shipping.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 94
Threads: 9
Joined: Feb 2013
City: Monroeville, PA
I would definitely drive. Not sure where you came up with the 7+ hours, but if the radio is in Belsano PA, and you are in the Whitehall PA area, it should only be about an hour and 40 minutes each way.
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
A friend of mine purchased a 38-690 from willie a year or so ago and he packed it EXTREMELY well and shipped the main chassis and power chassis in separate boxes, so 3 total... it arrived in perfect condition with not even a mark on any of the boxes... and that was from PA to South Dakota... I highly recommend the shipping...
Posts: 120
Threads: 15
Joined: Aug 2017
City: Fort Worth
State, Province, Country: TX
Quote "I would definitely drive. Not sure where you came up with the 7+ hours, but if the radio is in Belsano PA, and you are in the Whitehall PA area, it should only be about an hour and 40 minutes each way."
True if you're talking about the little village called Whitehall in Big Valley. Not true if it's the Whitehall, PA near Allentown (which per Mapquest would be a 7+ hour round trip).
Posts: 94
Threads: 9
Joined: Feb 2013
City: Monroeville, PA
My mistake. I guess there is more than one. There is a town named Whitehall close to where I live in Pittsburgh.
Posts: 111
Threads: 24
Joined: Oct 2016
City: Whitehall PA
OK pick up fans I whimped out. I'm having it shipped.
I was leaning toward shipping initially but $110 + 30 minutes to the Greyhound station beats a 7+ hour trip + gas + turnpike tolls. Also, my wife and I just drove out that way two weeks ago to visit family in Pittsburgh. Belsano is about 3/4 that distance. I wasn't up to making that drive again so soon.
As he has a reputation for packing well, I think the only real concern I have is the chassis packing. Outside of the cabinet, the large, fragile, plastic dial is exposed and needs protection. That scares me a bit. I mentioned that in my request for shipping.
Can't think of anything witty.
Greg O.
Whitehall, PA
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
When my friend got his the main chassis was in a wooden crate inside the cardboard box to protect it...
(This post was last modified: 10-02-2019, 11:11 PM by sdradioman.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Willie is the best...  He earned his reputation for good packing and shipping.
--
Ron Ramirez
Ferdinand IN
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
So, how did the shipping go?
Posts: 111
Threads: 24
Joined: Oct 2016
City: Whitehall PA
I'll let you know when it arrives.
I think it was shipped around the 7th. That's when the seller asked for my phone number for the shipping. He did say it could take a several weeks. It's been about 2 weeks.
I need to order parts and such. I'm a little low.
Can't think of anything witty.
Greg O.
Whitehall, PA
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
