Posts: 110
Threads: 24
Joined: Oct 2016
City: Whitehall PA
Hello,
So I just bid on and got this 37-116. Couldn't help myself, a cabinet that doesn't need work...
https://www.ebay.com/itm/Philco-37-116-C...7675.l2557
The question is; do I drive ~7+ hr round trip to get it or do I have it shipped? I'm certain it will fit as I have managed to tote a 37-690 in my VW Golf (hatchback). I would remove the chassis, but leave the speaker in place with the radio loaded on its back. But I also understand he packs well for shipping and the nearest Greyhound terminal is about 10 miles away, a shorter drive. Opinions?
Is the Radiodaze grill cloth below a match for this radio? It sure looks like it is.
http://www.radiodaze.com/grille-cloth-03...c03-18x25/
Can't think of anything witty.
Greg O.
Whitehall, PA
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
I drove for it.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Great radio! I guess it depends on a few things. Are you up to the round trip drive? Do you have some help to unload the case when you get home? Do you REALLY trust that the unit will be packed well and arrive as safe as it would if you transported it? Is the cost of shipping it justified? All that considered, if you go pick it up, be sure to bring some thick blankets to wrap it in before you put it in your car to prevent marring the cabinet. I look forward to hearing about your adventures restoring the electronics.
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
If it were me, I'd drive. I've done it for less. Great looking radio. I have one in similar condition that works VERY well. Now I have a second that needs a lot of work. Congrats!! Fun project. I have a thread here on my restoration.
(This post was last modified: 10-01-2019, 08:59 PM by rfeenstra.)
Posts: 15,527
Threads: 545
Joined: Oct 2011
City: Jackson, NJ
The price is surprisingly low for one of Willie's radios. Considering those usually have great cabinets, I expected a bit more.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
In ANY case, and I am sure that you already know. BUT the chassis is poorly secured at best. Unless the radio receives very careful handling, it should be removed for shipping.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 94
Threads: 9
Joined: Feb 2013
City: Monroeville, PA
I would definitely drive. Not sure where you came up with the 7+ hours, but if the radio is in Belsano PA, and you are in the Whitehall PA area, it should only be about an hour and 40 minutes each way.
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
A friend of mine purchased a 38-690 from willie a year or so ago and he packed it EXTREMELY well and shipped the main chassis and power chassis in separate boxes, so 3 total... it arrived in perfect condition with not even a mark on any of the boxes... and that was from PA to South Dakota... I highly recommend the shipping...
Posts: 120
Threads: 15
Joined: Aug 2017
City: Fort Worth
State, Province, Country: TX
Quote "I would definitely drive. Not sure where you came up with the 7+ hours, but if the radio is in Belsano PA, and you are in the Whitehall PA area, it should only be about an hour and 40 minutes each way."
True if you're talking about the little village called Whitehall in Big Valley. Not true if it's the Whitehall, PA near Allentown (which per Mapquest would be a 7+ hour round trip).
Posts: 94
Threads: 9
Joined: Feb 2013
City: Monroeville, PA
My mistake. I guess there is more than one. There is a town named Whitehall close to where I live in Pittsburgh.
Posts: 110
Threads: 24
Joined: Oct 2016
City: Whitehall PA
OK pick up fans I whimped out. I'm having it shipped.
I was leaning toward shipping initially but $110 + 30 minutes to the Greyhound station beats a 7+ hour trip + gas + turnpike tolls. Also, my wife and I just drove out that way two weeks ago to visit family in Pittsburgh. Belsano is about 3/4 that distance. I wasn't up to making that drive again so soon.
As he has a reputation for packing well, I think the only real concern I have is the chassis packing. Outside of the cabinet, the large, fragile, plastic dial is exposed and needs protection. That scares me a bit. I mentioned that in my request for shipping.
Can't think of anything witty.
Greg O.
Whitehall, PA
Posts: 112
Threads: 36
Joined: May 2015
City: Brandon, SD
When my friend got his the main chassis was in a wooden crate inside the cardboard box to protect it...
(This post was last modified: 10-02-2019, 10:11 PM by sdradioman.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Willie is the best...  He earned his reputation for good packing and shipping.
--
Ron Ramirez
Ferdinand IN
Posts: 330
Threads: 40
Joined: May 2015
City: Sanger, CA
State, Province, Country: California
So, how did the shipping go?
Posts: 110
Threads: 24
Joined: Oct 2016
City: Whitehall PA
I'll let you know when it arrives.
I think it was shipped around the 7th. That's when the seller asked for my phone number for the shipping. He did say it could take a several weeks. It's been about 2 weeks.
I need to order parts and such. I'm a little low.
Can't think of anything witty.
Greg O.
Whitehall, PA
Users browsing this thread:
|
|
Recent Posts
|
|
Correct model 84 Ac plug an cord type
|
| From what I read Philco went to using brown rubber power cords in 1936, so cloth was used in the 1935 and earlier models...Arran — 11:25 PM |
|
Correct model 84 Ac plug an cord type
|
| Hi Bruce,
I have not worked on an 84, but in general, power cords for almost any radio prior to 1938 was cloth covered...MrFixr55 — 08:34 PM |
|
Restoring Philco 38-14
|
| OK, well, so after staring at the sch again, I realized the problem had to be the #12/12A padder.
I put a scope on the o...morzh — 08:15 PM |
|
Correct model 84 Ac plug an cord type
|
| Hello Bruce,
I mostly use brown far as my cloth powercords go !
Here is the plug that I have used bakelite Acorn style...radiorich — 08:05 PM |
|
Correct model 84 Ac plug an cord type
|
| Looking for as correct as can find the right Ac plug an the correct colored cloth line. Ive seen many old photos but mos...Bruce — 04:13 PM |
|
Restoring Philco 38-14
|
| Rod
Two Y-caps make sense if you use them from L/N to the chassis; this is only makes sense in the transformer radios...morzh — 10:11 AM |
|
Restoring Philco 38-14
|
| Mike, I'm curious about a specific use of he Y cap. Lately I've seen a single cap across the power transformer primary. ...RodB — 09:01 AM |
|
Restoring Philco 38-14
|
| hello morzh ,
That sounds like a plan !
Sincerely Richardradiorich — 07:45 AM |
|
Restoring Philco 38-14
|
| Richard,
It helped some, but I still had the whining when engaging the rear power strip (I did not realize it was fro...morzh — 07:07 AM |
|
Restoring Philco 38-14
|
| Hello morzh,
Yes , that dreaded hum in my room where i do alighment I have my cable modem and router plus desktop plus ...radiorich — 11:25 PM |
|
Who's Online
|
There are currently 3539 online users. [Complete List]
» 1 Member(s) | 3538 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
