What Tube tester would be best to buy
Posts: 88
Threads: 17
Joined: May 2018
City: Hayden, ID
I’m looking for a tube tester that works, without spending an arm and a leg for it. Also what would be the best one to look for? Especially for older Philco radios.
Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Hickok 533. All of the good at a better price than a TV-7.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
I use an I-177 made for the signal corps for WW2; found it locally and had it calibrated all for about 200. Works great!
Posts: 88
Threads: 17
Joined: May 2018
City: Hayden, ID
Ok I bought a Jackson 648s for $236. So far it is working great. Going through my Philco 41-295x I found 5 bad tubes, I have them on order, so hopefully it will work now.
Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
(This post was last modified: 11-07-2019, 10:38 PM by nortonz.)
Posts: 120
Threads: 15
Joined: Aug 2017
City: Fort Worth
State, Province, Country: TX
Good choice! I like my 648S. There is a Jackson Model 648 tube tester manual that can be bought from https://vacuumtubesinc.com/index.php/boo...anual.html for $28.50. It's a bit pricy but useful.
Posts: 88
Threads: 17
Joined: May 2018
City: Hayden, ID
I found a free updated one on the web, plus a very complete tube substitution manual, it was also free. I can upload it to the Phorum is you need it.
Michael
Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
Posts: 22
Threads: 1
Joined: Oct 2020
City: East Greenbush
State, Province, Country: New York
I need a tube tester so I can restore my radios. Should I be considering a utracer3 or something more traditional like a Hickok model?
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
I had not heard of the uTracer; I have an old I-177 that I use for these old tubes...something like that will need to be calibrated, probably
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Personally, I think the tube tester which offers the best bang for the buck is the Heathkit TT-1, with its optional TT-1-A adapter. It is a dynamic mutual conductance tester, and is sometimes overlooked by those who want the Hickok testers.
I picked mine up at an auction of an old radio-TV repair shop in western Kentucky back in the 1980s. In more recent years, I fully recapped it, found the calibration instructions online, and calibrated it.
I consider it to be the best two dollars I ever spent.
--
Ron Ramirez
Ferdinand IN
Posts: 22
Threads: 1
Joined: Oct 2020
City: East Greenbush
State, Province, Country: New York
Am I correct that the consensus is a conventional tube tester is preferred to a curve tracer?
Posts: 15,813
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
To repair radios you do not really need a curve tracer. If you are into stereo amps, that might be justified; else a mutual conductance tester is all you need. And some would argue that even that is too much.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,598
Threads: 100
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello nortonz,
My self I use a Precision 920 and a B&K tube tester and some other handy test equpment to have is VTVM plus Signal tracer and Signal generator.
Sincerely Richard
Posts: 330
Threads: 30
Joined: Aug 2017
City: Hay Lakes, Alberta,Canada
If you're in Canada, a Stark 9-66 is one of the best testers built/sold here; Stark used Hickok patents.
Posts: 22
Threads: 1
Joined: Oct 2020
City: East Greenbush
State, Province, Country: New York
Thank you for the help. Now I know how to proceed.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Shadow Meter Bulb
|
I think after all has been said, I will use the same bulb that is specified for the dial pilot light which is a #55.
I ...georgetownjohn — 07:31 PM |
12' Philco
|
There was also this Philco!
klondike98 — 07:25 PM |
HiFi (Chifi) tube amp build - but my own design.
|
I expected a challenge and this is just part of it. But, it's also supposed to be fun, entertaining, informative and enj...TV MAN — 07:12 PM |
Shadow Meter Bulb
|
Butting in here with a question. Since the shadow meter is connected directly to the 1st and 2nd I.F.'s wouldn't the met...RossH — 06:43 PM |
HiFi (Chifi) tube amp build - but my own design.
|
Mike, Tim; you are about to enter the twilight zone. Doo doo doo doo, doo doo doo doo
This is something alright. I'm go...RodB — 06:26 PM |
HiFi (Chifi) tube amp build - but my own design.
|
:lol: We need to start a singing radio group! I play the guitar, so maybe get a few vocals? Anyways, Mike, I did try mou...TV MAN — 05:56 PM |
HiFi (Chifi) tube amp build - but my own design.
|
And so does a barber shop quartet. mmmmmmRodB — 03:54 PM |
Shadow Meter Bulb
|
I did try an LED bulb in place of the original but wasn't impressed with the amount of light on the dial. Seems like it ...RodB — 03:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
Tim
Would mounting he transformer vertically change the hum, if used without additional parts?
Also, in these amps...morzh — 02:25 PM |
Shadow Meter Bulb
|
Gary
I doubt it would introduce any noise. We use similar lamps for the panel indication, 12V AC lamps: they are LEDs...morzh — 02:15 PM |
Who's Online
|
There are currently 5454 online users. [Complete List] » 1 Member(s) | 5453 Guest(s)
|
|
|
|