Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is it worth it?
#1

I have had for some time a Philco "Mystery" Remote Radio Control.  A Philco 39-116RX World's Fair radio just popped up some 2.5 hours from where I live.

Is it worth the effort to go 5 hours both ways to get it?  Do these remotes really work with the radios to change stations remotely?  Or, was it just a gimmick used by Philco to sell radios?

I'm pondering if it is worth the trouble.  Thanks for any insight.

Scott


Attached Files Image(s)
       
#2

The Mystery controls work below broadcast band the remote sends a series of pulses keyed by the telephone dial. There is a type 30 tube and a fil/plate battery inside the filament lights very quickly at the time of dialing. The receiver for the low frequency uses the loop antenna in the bottom of the radio, a thyratron tube to key a step transfer relay and a two phase motor to turn the appropriate mechanism.

The receiver and the transmitter have to be on the same frequency and are identified by a number, FWIR there are just a few frequencies. I also believe the Mystery box frequency or the radio can be tuned to match if they don't already.

Most problems are dried out bipolar AC cap at the motor as well as the usually paper caps in the low frequency receiver. I think the range is about 30ft and one wall in between...

There are ample documents online for this feature so it is no "Mystery" at all...

Be aware the dial and its escutcheon are made of Tenite and may be irreparable warped.

Get it working, impress your friends and neighbors, old cool stuff!

GL

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#3

Me? No as I dont love the style but I did drive 6 hours once for a piece of crap grandfather clock radio. Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

You should be aware that is a 39-55RX, not a 39-116RX. Notice it is AM only. It's just a basic AM radio with the added novelty of wireless remote control. To me it wouldn't be worth the effort to drive 5 minutes both ways to get it for $5, but then again I really don't care for those sets. We all like different stuff, that's what makes this hobby so neat and interesting - there are different radios to suit everyone's likes. Icon_smile

--
Ron Ramirez
Ferdinand IN
#5

At least it's not in Diamond Oregon.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Thanks all. Maybe if the seller is coming to where I live to visit his daughter (the same town). But, I won't go out of my way. Thanks again!




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM
40-150 General questions
Hi Kevin, No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM
Philco 38-7 Speaker
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM
40-150 General questions
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM

[-]
Who's Online
There are currently 2731 online users. [Complete List]
» 2 Member(s) | 2729 Guest(s)
AvatarAvatar

>