Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is it worth it?
#1

I have had for some time a Philco "Mystery" Remote Radio Control.  A Philco 39-116RX World's Fair radio just popped up some 2.5 hours from where I live.

Is it worth the effort to go 5 hours both ways to get it?  Do these remotes really work with the radios to change stations remotely?  Or, was it just a gimmick used by Philco to sell radios?

I'm pondering if it is worth the trouble.  Thanks for any insight.

Scott


Attached Files Image(s)
       
#2

The Mystery controls work below broadcast band the remote sends a series of pulses keyed by the telephone dial. There is a type 30 tube and a fil/plate battery inside the filament lights very quickly at the time of dialing. The receiver for the low frequency uses the loop antenna in the bottom of the radio, a thyratron tube to key a step transfer relay and a two phase motor to turn the appropriate mechanism.

The receiver and the transmitter have to be on the same frequency and are identified by a number, FWIR there are just a few frequencies. I also believe the Mystery box frequency or the radio can be tuned to match if they don't already.

Most problems are dried out bipolar AC cap at the motor as well as the usually paper caps in the low frequency receiver. I think the range is about 30ft and one wall in between...

There are ample documents online for this feature so it is no "Mystery" at all...

Be aware the dial and its escutcheon are made of Tenite and may be irreparable warped.

Get it working, impress your friends and neighbors, old cool stuff!

GL

Chas

Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
#3

Me? No as I dont love the style but I did drive 6 hours once for a piece of crap grandfather clock radio. Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

You should be aware that is a 39-55RX, not a 39-116RX. Notice it is AM only. It's just a basic AM radio with the added novelty of wireless remote control. To me it wouldn't be worth the effort to drive 5 minutes both ways to get it for $5, but then again I really don't care for those sets. We all like different stuff, that's what makes this hobby so neat and interesting - there are different radios to suit everyone's likes. Icon_smile

--
Ron Ramirez
Ferdinand IN
#5

At least it's not in Diamond Oregon.

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Thanks all. Maybe if the seller is coming to where I live to visit his daughter (the same town). But, I won't go out of my way. Thanks again!




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Restore Code ??
I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM
Philco 91 Restore Code ??
Yep. 10W is probably enough. Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM
Philco 91 Restore Code ??
I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM
Philco 91 Restore Code ??
No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM
Philco 91 Restore Code ??
Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM
Restoring Philco 96
Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be. Although wh...morzh — 01:42 PM
Philco 91 Restore Code ??
Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM
New member
Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM
Restoring Philco 96
Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM
Restoring Philco 96
Joseph well, for now we will have to get by the video I have made, as the final video would not be made before I get a ...morzh — 01:04 PM

[-]
Who's Online
There are currently 4643 online users. [Complete List]
» 3 Member(s) | 4640 Guest(s)
AvatarAvatarAvatar

>