Found—Model 40-150 in Chinese black lacquer highboy cabinet
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 5,584
Threads: 291
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
Welcome to the Phorum!
Its not a Philco cabinet, that's for sure. I would suspect there are not many other cabinets like it.
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA

Thanks, Bob. I'll post pics as it comes back together. Cabinet is mahogany with black lacquer. 3 legs were snapped at the top, but should be repairable. I'm looking forward to it, but more so to the radio restoration. I have a number of radios waiting for me to learn more before I start, including a 1930 Kellogg Model 524 that will be last on the list. This is a shot of the back panel to the cabinet.
Posts: 1,418
Threads: 41
Joined: Jan 2014
City: Wellborn Florida
Some info from Beitmans
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 18,427
Threads: 622
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Whatever it is, it is an uncommon radio and didn't become any worse from being put in this cabinet.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 1,519
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Hello. That looks like the part # 38-9935 of the cardboard antenna back. I have a model 40-150 Philco. It is in a wood slant front cabinet.
Restored the chassis 3yrs ago. I think they have the rubber wire that is usually rotten and falling apart. Good luck with the restoration plenty help here if you need it.
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Thanks, Mike. Looking forward to it!
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
FANTASTIC!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 21
Threads: 5
Joined: Oct 2019
City: Boston
State, Province, Country: MA
Posts: 4,108
Threads: 310
Joined: Nov 2013
City: Kings Park NY
Momma LIKE!
Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
Posts: 1,519
Threads: 69
Joined: Nov 2012
City: Kansas city, MO.
Good job getting it back up on its feet.
Posts: 358
Threads: 4
Joined: Aug 2015
City: Monteith, Ontario CA
I wonder if the antiquity here is NOT the radio as much as the cabinet. Maybe you should take your photos to an antique furniture specialist and see if the cabinet is rare and worth donating to a museum or ... what it's history might be?
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
54C Complete Teardown/Rebuild
|
| Hello Roy,
here is this one
sincerely Richardradiorich — 12:45 AM |
|
54C Complete Teardown/Rebuild
|
| Richard,
Had grabbed it already but thank you just the same. I find myself wanting to find some way to block out the...glyphmon — 12:03 AM |
|
54C Complete Teardown/Rebuild
|
| Hello roy,
here is a link to the schematic .
Sincerely Richardradiorich — 11:54 PM |
|
54C Complete Teardown/Rebuild
|
| Richard,
The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Did an alignment today which was interesting. IF alignment went great, almost all was already spot-on. Adjusting on th...glyphmon — 11:35 PM |
|
54C Complete Teardown/Rebuild
|
| The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM |
|
54C Cabinet Refinish
|
|
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM |
|
54C Complete Teardown/Rebuild
|
| While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project. O...glyphmon — 11:07 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Hello roy,
that great news glad it worked out for you !!
Sincerely Richardradiorich — 10:50 PM |
|
Preliminary work on wife's Silvertone 2014
|
| Safety caps arrived today. Soldered one in and had a successful first power-up. No magic smoke escaped and it tunes in...glyphmon — 09:53 PM |
|
Who's Online
|
There are currently 2059 online users. [Complete List] » 1 Member(s) | 2058 Guest(s)
|
|
|
|

|