Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
I soaked the idler in brake fluid for a day (read about that on a forum) and the turntable now works. It still slows during the automatic cycles but I don't have help it along anymore. There is a stereo cartridge in the tone arm but it sounds horrible. There is no indication of the manufacturer of the cartridge so hard to find a new needle. I may see what cartridge I can find to be able to play LP's. I hooked up a Dual with a magnetic cartridge and a phono pre. It sound s pretty good! I have a couple of extra turntables so that may be a more practical way of doing it. Then again, I doubt the radio will be used that way so maybe it's not worth the effort! Just leave the Garrard for looks.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Try doing a search on eBay for "crystal phono cartridge." I just did, and there are quite a few available. You may well find something that will fit in your tone arm.
Posts: 67
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi,
I have a Scott All Wave 23 in a Waverley cabinet with the Garrard RC88 /4 which is the similar to the RC98 that you have but without the turntable speed manual adjustment. I have a GE Variable Reluctance cartridge (and preamp). The cartridge is mono and has two stylus. 1 for 78 and 1 for microgroove records. I like it very much and sounds great on both 78 and mono microgroove. I actually have 2 identical Garrard changers. The other one is in a mid 50's Fischer Electra. Yes, would recommend the GE VR cartridge setup.
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
thanks! I'll look it up. Does yours have the push down and turn stylus? What version of the GE cartridge do you have?
(This post was last modified: 03-31-2020, 09:26 PM by rfeenstra.)
Posts: 67
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi,
The cartridge in the Scott Garrard is marked VRII. And yes, it is the "push down and turn" version with 2 styli (styluses?).
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
For anyone who is working on, or very interested in E.H. Scott, or Scott Radio Labs receivers, I recommend you visit https://ehscott.ning.com/ . They are a similar site to this one specializing in Scott receivers. I found them when looking for information on my SRLM using Duck Duck Go. Lots of good folks there who have experience with Scott receivers, just as the folks here specialize in Philco.
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
Oh oh!! I just let the smoke out of the Philly! It's been playing beautifully for days. Now I gotta put the 37-116 aside and figure out what happened.
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
A plate resistor on an 6J5 smoked. These are carbon resistors with a ceramic housing. There is a part of me that likes to replace all resistors for the sake of reliability.
Posts: 1,277
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
I'm glad it wasn't more serious. When I read the word smoke, all sorts of unfortunate scenarios came to mind.
I don't hold with furniture that talks.
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
What blew my mind when it went was that the eye tubes went dark just before I saw the smoke. This, I don't think, could have caused that. So I am a little concerned that something else (solder flash) is in there causing a problem. It's been playing great again for many hours now.
Posts: 323
Threads: 30
Joined: Jul 2017
City: Hay Lakes, Alberta,Canada
Oh oh!!! Let us know what you find...
Posts: 102
Threads: 14
Joined: Jul 2017
City: Bakersfield, CA
A beautiful radio and cabinet. Still looking for a cabinet for my original pointer Philharmonic from 1937. Thanks for sharing!
Posts: 1,185
Threads: 49
Joined: Oct 2017
City: Allendale, MI
I've walked past this thing in a darkened room many times and I often wonder how many children were scared stiff of these twin-eyed monsters.
Posts: 1,277
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
LOL, that is a bit menacing!
I don't hold with furniture that talks.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Correct model 84 Ac plug an cord type
|
| From what I read Philco went to using brown rubber power cords in 1936, so cloth was used in the 1935 and earlier models...Arran — 11:25 PM |
|
Correct model 84 Ac plug an cord type
|
| Hi Bruce,
I have not worked on an 84, but in general, power cords for almost any radio prior to 1938 was cloth covered...MrFixr55 — 08:34 PM |
|
Restoring Philco 38-14
|
| OK, well, so after staring at the sch again, I realized the problem had to be the #12/12A padder.
I put a scope on the o...morzh — 08:15 PM |
|
Correct model 84 Ac plug an cord type
|
| Hello Bruce,
I mostly use brown far as my cloth powercords go !
Here is the plug that I have used bakelite Acorn style...radiorich — 08:05 PM |
|
Correct model 84 Ac plug an cord type
|
| Looking for as correct as can find the right Ac plug an the correct colored cloth line. Ive seen many old photos but mos...Bruce — 04:13 PM |
|
Restoring Philco 38-14
|
| Rod
Two Y-caps make sense if you use them from L/N to the chassis; this is only makes sense in the transformer radios...morzh — 10:11 AM |
|
Restoring Philco 38-14
|
| Mike, I'm curious about a specific use of he Y cap. Lately I've seen a single cap across the power transformer primary. ...RodB — 09:01 AM |
|
Restoring Philco 38-14
|
| hello morzh ,
That sounds like a plan !
Sincerely Richardradiorich — 07:45 AM |
|
Restoring Philco 38-14
|
| Richard,
It helped some, but I still had the whining when engaging the rear power strip (I did not realize it was fro...morzh — 07:07 AM |
|
Restoring Philco 38-14
|
| Hello morzh,
Yes , that dreaded hum in my room where i do alighment I have my cable modem and router plus desktop plus ...radiorich — 11:25 PM |
|
Who's Online
|
There are currently 2425 online users. [Complete List]
» 1 Member(s) | 2424 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
