Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
I soaked the idler in brake fluid for a day (read about that on a forum) and the turntable now works. It still slows during the automatic cycles but I don't have help it along anymore. There is a stereo cartridge in the tone arm but it sounds horrible. There is no indication of the manufacturer of the cartridge so hard to find a new needle. I may see what cartridge I can find to be able to play LP's. I hooked up a Dual with a magnetic cartridge and a phono pre. It sound s pretty good! I have a couple of extra turntables so that may be a more practical way of doing it. Then again, I doubt the radio will be used that way so maybe it's not worth the effort! Just leave the Garrard for looks.
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
Try doing a search on eBay for "crystal phono cartridge." I just did, and there are quite a few available. You may well find something that will fit in your tone arm.
Posts: 65
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi,
I have a Scott All Wave 23 in a Waverley cabinet with the Garrard RC88 /4 which is the similar to the RC98 that you have but without the turntable speed manual adjustment. I have a GE Variable Reluctance cartridge (and preamp). The cartridge is mono and has two stylus. 1 for 78 and 1 for microgroove records. I like it very much and sounds great on both 78 and mono microgroove. I actually have 2 identical Garrard changers. The other one is in a mid 50's Fischer Electra. Yes, would recommend the GE VR cartridge setup.
Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
thanks! I'll look it up. Does yours have the push down and turn stylus? What version of the GE cartridge do you have?
(This post was last modified: 03-31-2020, 09:26 PM by rfeenstra.)
Posts: 65
Threads: 7
Joined: Oct 2017
City: bloomfield, ct
Hi,
The cartridge in the Scott Garrard is marked VRII. And yes, it is the "push down and turn" version with 2 styli (styluses?).
Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
Posts: 1,824
Threads: 114
Joined: Jul 2014
City: Sneedville, TN
For anyone who is working on, or very interested in E.H. Scott, or Scott Radio Labs receivers, I recommend you visit https://ehscott.ning.com/ . They are a similar site to this one specializing in Scott receivers. I found them when looking for information on my SRLM using Duck Duck Go. Lots of good folks there who have experience with Scott receivers, just as the folks here specialize in Philco.
Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
Oh oh!! I just let the smoke out of the Philly! It's been playing beautifully for days. Now I gotta put the 37-116 aside and figure out what happened.
Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
A plate resistor on an 6J5 smoked. These are carbon resistors with a ceramic housing. There is a part of me that likes to replace all resistors for the sake of reliability.
Posts: 1,277
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
I'm glad it wasn't more serious. When I read the word smoke, all sorts of unfortunate scenarios came to mind.
I don't hold with furniture that talks.
Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
What blew my mind when it went was that the eye tubes went dark just before I saw the smoke. This, I don't think, could have caused that. So I am a little concerned that something else (solder flash) is in there causing a problem. It's been playing great again for many hours now.
Posts: 320
Threads: 30
Joined: Jul 2017
City: Hay Lakes, Alberta,Canada
Oh oh!!! Let us know what you find...
Posts: 102
Threads: 14
Joined: Jul 2017
City: Bakersfield, CA
A beautiful radio and cabinet. Still looking for a cabinet for my original pointer Philharmonic from 1937. Thanks for sharing!
Posts: 1,184
Threads: 49
Joined: Oct 2017
City: Allendale, MI
I've walked past this thing in a darkened room many times and I often wonder how many children were scared stiff of these twin-eyed monsters.
Posts: 1,277
Threads: 44
Joined: Nov 2017
City: Menlo Park
State, Province, Country: CA
LOL, that is a bit menacing!
I don't hold with furniture that talks.
Users browsing this thread: 4 Guest(s)
|
|
Recent Posts
|
|
Cannot Adjust an IF Transformer’s cores
|
| Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
|
PT-6 antenna connections
|
| Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
|
PT-6 antenna connections
|
| Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
|
bridkarl
|
| I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| Joseph, now you are an engineer!!RodB — 06:37 PM |
|
PT-6 antenna connections
|
| Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
|
PT-6 antenna connections
|
| I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
