Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Looking for a detailed layout of the underside of this radio.. Parts layout and wiring..
USES CHASSIS Number 8A02
Does anyone have or maybe worked on this and has some detailed drawings they made??
Thanks
Skip
(This post was last modified: 08-23-2020, 12:49 AM by
vecher.)
Posts: 933
Threads: 140
Joined: Mar 2015
City: Lansdale
State, Province, Country: PA
Anyone have a clue to what this is? and were the white wire goes??
[Image:
https://live.staticflickr.com/65535/5026...b57f_c.jpg]
Skip
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Wherever the white wire is supposed to go it's a fairly late addition to the radio, probably because the original was a crumbling rubber wire.
Maybe that's the antenna coil? It's hard to tell from that small view, can you post a picture of the entire underside of the chassis?
For anyone following the schematic is in volume 12, Zenith p. 12-18
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 7,286
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
First you need to figure out which coil it is (ant or osc). Then use an ohm meter to see what relationship the white wire has to the other terminals on the coil. Using the schematic sort out where the wire goes. Piece of cake!!
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry