Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Pre-war, High Tube Count Table Radios
#1

We all know of the famous Philco 16 line of cathedral and tombstone radios, but I wonder who else made high tube count table radios before the war? I have seen a big RCA or two and I think even Zenith did it for a short bit. My GE FE-112 is the first over 8 tube table radio I have seen of its style as most I see are usually tombstone style at least. So, what others have you all seen? Must be before the war and at least 10 tubes, perhaps 9 as I have seen mostly eight tubes as the cut-off for most table radios.

No matter where you go, there you are.
#2

http://www.jitterbuzz.com/indrad.html#m4688

Silvertone had some very fancy stuff, look at the 4688.....

Paul

Tubetalk1
#3

Wow, nice, big table radio from Silvertone on that page! I have one of those high ended, 14 tube Silvertones that I ran into a roadblock on and should get back to before I run out of local help on the thing. Oh, I also noticed that the writer of that page seems a little sarcastic.

No matter where you go, there you are.
#4

I have an 8 tube Silvertone table set. Weighs about 30 lbs......

http://tubetalkclassicradioshow.org/imag...6%20-2.jpg

For scale I am 6.3 and come in at about 265 lbs.

Paul

Tubetalk1
#5

I have a GE E-101 Colorama set. This one should qualify with 10 tubes. It’s the heaviest table tombstone I have.

Tony

“People may not remember how fast you did a job, but they will remember how well you did it”
#6

+1 on the E-101.

I have a Zenith 12S232 Walton set that would qualify with 12 tubes

Greg V.
West Bend, WI
Member WARCI.org
#7

http://www.midwestradiomuseum.com/1239L.jpg

Here is a nice Midwest, 1939, 12 tube.

Paul

Tubetalk1
#8

I've got an 11 tube Pilot Super Wasp from around 1931 with two chassis (one for SW) that is a beast at over 33" wide.  Shown below with my collecting buddy Terry Layman when we were bringing it home from New Jersey:

   
   

I have a large 10 tube GE cathedral J100:

   

I think all my other radios over 9 tubes are consoles.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#9

I am seeing some neat radios and learning a bit as well! Oh, I wish my late friend was still around as that Pilot Super Wasp might have very well solved a mystery from his late childhood. He recalled going to a flea market with his dad and seeing a huge table radio that looked like it was from the early 30's with two chassis, but didn't remember the name. As far as the GE Colorama, I almost bought one a few years ago.

Might as well post my GE here as getting that radio started all this in my mind. About 23.25 inches wide by 11.25 inches deep. Looks roughly the same for height, not sure about weight. 1938 General Electric FE-112

   

No matter where you go, there you are.
#10

While not high tube count I do have some very large table models, a Stewart Warner 1946 and a RCA from 1938, easily about 24 inches across.

The larger sets do seem to play well, maybe a bit more engineering and component quality in them.


Here is a RCA 28X5 just before they stopped production for the war..............8 tubes, 9 inch speaker.

https://www.flickr.com/photos/92577012@N...ed-public/

Paul

Tubetalk1
#11

If one thinks about it, Philco 90 is a 9-tuber.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#12

Paul, after looking up the specs on the RCA 28X5, I definitely would not turn down a nice example if I found it for a fair price!
I never really thought about the Philco 90B as my mind was thinking slightly later, more advanced radios, but it is a 9 tube radio indeed and a fairly large table radio at that!

No matter where you go, there you are.
#13

I have a 10-tube Crosley 1055-EK in my collection.  Photos of mine here:
https://www.radiomuseum.org/r/crosley_cl...055_e.html

I also have a 10-tube Zenith 10-S-130, but no photo handy.

I used to have a 10-tube RCA T10-1, but I traded it away to get a Philco 630CSX.  Good trade!

I've been keeping my eyes open for a GE FE-112 almost since I started the hobby, but none has ever come my way.
#14

Tube count isn't always an indication of performance. I have two radios that have tubes that do nothing; triodes that have cathode and plate wired to ground.
#15

With regard to tube count alone, as these are consoles, I have my 13 tube 1937 Silvertone model 4488A sitting next to my 6 tube 1936 Zenith 6S52. Whenever I have someone visit me and ask about what the number of tubes has to do with how a radio sounds, I demonstrate these two. The Zenith has a 10 inch speaker, and the Silvertone a 12 inch. Both sound good, but for sound quality and sheer power, it's day and night. Likewise for table models, I have my 1935 Philco model 16 with 11 tubes sitting next to a 5 tube 1935 Westinghouse model WR-22 small tombstone and demonstrating those two one after another really illustrates the difference tube count (and of course speaker size) makes for performance.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread:
[-]
Recent Posts
Need to purchase some accessories for restoration of my Old Philco Radio
Here is a list of resources found in our online library that you might find useful. Mike's Gobs of Knobs email addres...klondike98 — 01:46 PM
First Radio restoration
Hi Tubeman, Welcome to the Philco Phorum.  Phamily Phriendly Pfun with Phine Pholks Phull of Philco Phacts. (See a p...MrFixr55 — 12:33 PM
First Radio restoration
You could post in the WANTED ADs section here on the Phorum and see if anyone has an RF generator that they want to sell...klondike98 — 11:55 AM
Zenith H725
Good ideas, thank you Arrange and Rich. I have the adhesive aluminum foil already and can try that immediately. More ...EdHolland — 10:18 AM
Graphics for majestic 1050 dial glass.
Murf; I found this thread on the ARF, the first photo has a pretty good view of the dial glass. Regards ArranArran — 01:12 AM
Zenith H725
hello Ed, how about that speacial tape used for ducting it's like foil or how about thin piece of aluminum roof flash...radiorich — 12:19 AM
Zenith H725
Ed; One material that I have seen, but never tried for this was material for making exhaust gaskets, it's similar to ...Arran — 11:42 PM
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM

[-]
Who's Online
There are currently 2392 online users. [Complete List]
» 2 Member(s) | 2390 Guest(s)
AvatarAvatar

>