Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

replacing artificial leather on a 46-350 radio
#1

has any one replaced the artificial leather and do you have any instructions on do it I need all the help i can get, thank you
#2

I have patched the covering for this model but never had to replace it. I did a restoration on a Zenith TO (R600 I think) and discovered techniques for replacing the skin on Zenith web sites. I would imagine it's much the same. If you can get the old sections off in one piece, maybe with a little heat and a blade, you will have a pattern for each piece. Take lots of pictures.
#3

The previous owner cut holes in one side so I removed the ends and all other leather. The ends came off in one piece but they seemed to have been formed around the corners no cut marks.
#4

Donald, do you have a picture of your radio?

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#5

I have pictures on my phone but don't know how to download to your site I am not computer savy
#6

How - to add pictures:

https://philcoradio.com/phorum/showthread.php?tid=29

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Zenith H725
I just remembered, I have some hi temp silicone rubber material which could do the trick. Or a piece of FR4 laminate. Th...EdHolland — 08:39 PM
Zenith H725
The PSU filter cap arrived today (thank you USPS!) so I will work on that later. Meanwhile, I have the dial, speaker...EdHolland — 06:42 PM
Philco 610B oscillator wiring
Thanks Terry. After checking my notes I think I recorded about -10v at the 6A7 G4/control grid. The screen grid (G3 &...Tubester — 05:59 PM
The list of my radio & TV collection!
Magical chords of forgotten melodies, old nostalgic music on an old radio... Saturday night blues on the Mid-Waves on an...RadioSvit — 12:20 PM
Philco 42-345 Restoration/Repair
Thank you MrFixr55 the issue with this radio is that the internal coil antenna is missing and there was a wire in its pl...osanders0311 — 11:34 AM
Philco 610B oscillator wiring
Regarding the oscillator circuit which is comprised of the 6A7's cathode, control grid, and screen grid. These elements ...Radioroslyn — 10:33 AM
Philco 42-345 Restoration/Repair
Hi OSanders, First off, welcome to the Philco Phorum where Phine Phamily-Phriendly Pholks Phull of Philco Phacts and P...MrFixr55 — 08:41 AM
Philco 42-345 Restoration/Repair
Today I've been reading through the site trying to learn more about this radio. I also soldered the lose power cord cabl...osanders0311 — 08:24 PM
Philco 610B oscillator wiring
Thanks David! I do have that same later prodution model 610 schematic. I've also studied the Philco service bulletins fo...Tubester — 08:12 PM
Philco 610B oscillator wiring
Some info from Beitmans says late production. David   David — 06:06 PM

[-]
Who's Online
There are currently 1820 online users. [Complete List]
» 3 Member(s) | 1817 Guest(s)
AvatarAvatarAvatar

>