Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1948 Crosley TV/FM 9-407 Restore on Youtube
#1

Hi All...I have a new restore series on Youtube working on a 1948 Crosley TV and FM radio Model 9-407.
Here is a link below to anyone interested.[Image: https://philcoradio.com/phorum/images/sm...n_clap.gif]
[color=var(--ytcp-link-color)]https://youtu.be/Cw6y3ugYWVI[/color]
#2

Hey Buzz, that is a pretty big project! I'm looking forward to future installments, thanks for all the work you put into entertaining us Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#3

Hi Buzz, great project and Video!

I have a 1950 Meck Philharmonic Model 8200, that I had picked up from Facebook Marketplace last year that when I got it it was still in really good shape yet (despite coming from an old farmhouse that its roof had collapsed over 20 years ago) and I had to replace all of the capacitors in the TV and quite a few of the original resistors as well, and I had to replace some of the tubes as well. 

I was able to get it up and running after several attempts (and an improperly installed voltage doubler capacitor) and my TV uses the same exact picture tube as your TV does which is a 12P4 picture tube and that TV technically has a 10" picture (it uses a 12" picture tube with a 10" mask).

take a look at my thread here which is my complete journey through resurrecting my 1950 Meck Philharmonic TV, and no unfortunately I didn't make any videos of my restoration project.

Good luck with your new project!
#4

Part 2 is now uploaded
link below to anyone interested
https://youtu.be/Nu9webNvSvA
#5

Part 3 of this series now uploaded.
link below to anyone interested
https://youtu.be/HVf3hYHh8hY
#6

Another great episode Buzz! Icon_thumbup Icon_thumbup

Sorry you had some much trouble with the flybacks and/or tester.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

Anybody wants a 9-407 drop a pm.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#8

Nice job Buzz.
#9

Buzz, I have a question. To mention a universal replacement flyback. Where did you find it?

Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#10

Moyer Electronics in Pennsylvania
#11

Part 4 of this series is now uploaded.
link below to anyone interested.

https://www.youtube.com/watch?v=QL9nr5JR...l=Buzz1151
#12

thanks Captain
#13

Another great episode to help wile away the hours during our deep freeze. Thanks Buzz Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#14

Part 5 and final episode now uploaded.
link below to anyone interested
https://www.youtube.com/watch?v=-IjMBaCqHGc
#15

Very nice job ! Congratulations.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM
Model 28L
Hello, I'm restoring a Philco 28L and the output transformer is open. Part number of the transformer is 32-7020. Can...HORSTE — 10:32 AM

[-]
Who's Online
There are currently 3958 online users. [Complete List]
» 3 Member(s) | 3955 Guest(s)
AvatarAvatarAvatar

>