Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Transitone Model C 1608
#1

Hi everyone,
 I have just taken delivery of an example of this set.When bought I did not even know who the maker was but I have made progress and now have the schematic and associated notes. But at this stage I have not been able to access a picture of this set. And mine is in a sorry state so I am keen to have a look at a picture to see what it should look like. Can anyone suggest where I should look online to see what a good or intact  C 1608  set  looks like?
Thanks everyone and cheers.
#2

Scroll down to 1939 and have a look, it's there.
Plymouth 1 - Identifying Car Radios (google.com)

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

How great to have the Philco Phorum and such well informed people at the helm!I know now that my set is out of a Plymouth as its one remaining knob is brown.Thanks so much.
#4

Here's another pic of it from a '39 Desoto. It's part of the same family of autos. Dodge, Plymouth, Chrysler, and Desoto. I know a guy that is restoring a '39 Desoto but I'm not sure if it has a radio. I'll drop him a note and see what the story is.

http://www.2040-parts.com/1939-radio-chr...-i2221625/

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

I did check with my friend out in Colorado to find that his is a different set.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#6

Hi there Radioroslyn, Thank you for checking.And for the picture. Sadly my set,while internally it looks untouched, has suffered the ravages of the weather on the outside . I'm presuming the bottom button of the stack of station pre- select buttons is the one that disables the pre- select and re engages the  manual tuning system. Cheers and thanks. I'll post again when I have started work on it.
#7

I have one that I am recapping.I will try to post pictures.
#8

   
#9

Hi Keefer, Thanks for taking the time to post this picture. Yours is in tiptop condition compared to mine.So its great to see what a good one is like. Mine lacks the grille and has only one knob. Thanks for responding to such an old post Cheers,
#10

No problem.I recapped it and it works pretty good.If need anything else holler at me and i will try and help.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Shadow Meter Bulb
I think after all has been said, I will use the same bulb that is specified for the dial pilot light which is a #55. I ...georgetownjohn — 07:31 PM
12' Philco
There was also this Philco! klondike98 — 07:25 PM
HiFi (Chifi) tube amp build - but my own design.
I expected a challenge and this is just part of it. But, it's also supposed to be fun, entertaining, informative and enj...TV MAN — 07:12 PM
Shadow Meter Bulb
Butting in here with a question. Since the shadow meter is connected directly to the 1st and 2nd I.F.'s wouldn't the met...RossH — 06:43 PM
HiFi (Chifi) tube amp build - but my own design.
Mike, Tim; you are about to enter the twilight zone. Doo doo doo doo, doo doo doo doo This is something alright. I'm go...RodB — 06:26 PM
HiFi (Chifi) tube amp build - but my own design.
:lol: We need to start a singing radio group! I play the guitar, so maybe get a few vocals? Anyways, Mike, I did try mou...TV MAN — 05:56 PM
HiFi (Chifi) tube amp build - but my own design.
And so does a barber shop quartet. mmmmmmRodB — 03:54 PM
Shadow Meter Bulb
I did try an LED bulb in place of the original but wasn't impressed with the amount of light on the dial. Seems like it ...RodB — 03:51 PM
HiFi (Chifi) tube amp build - but my own design.
Tim Would mounting he transformer vertically change the hum, if used without additional parts? Also, in these amps...morzh — 02:25 PM
Shadow Meter Bulb
Gary I doubt it would introduce any noise. We use similar lamps for the panel indication, 12V AC lamps: they are LEDs...morzh — 02:15 PM

[-]
Who's Online
There are currently 5519 online users. [Complete List]
» 1 Member(s) | 5518 Guest(s)
Avatar

>