Posts: 15,804
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
This is the battery version.
Same cabinet.
Is it worth it? I do want an 82 but I want an AC version.
There is one on CL now, cheap.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
If the cabinet is in good shape go for it, especially if it's cheap. I think the 82 is one of the nicest cathedral designs ever made. You've got a basement full of AC sets, you need at least one battery version of an old radio.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 4,702
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Mike;
I haven't gad a look at the schematic but many of those battery radios from the 1930s might surprise you for performance. One thing that they often have in their favor is lower hours then an equivalent AC radio, and a lack of heat, or high voltage, to stress things. If you had the AC version you would still need to take the power transformer out and replace the wires, as well as rebuilding the power supply, in a battery set you get to pick your own design since it's off board.
Regards
Arran
Posts: 15,804
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
By "cheap" I meant $125. For AK82 it is cheap.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes, these days that is cheap. Go get it a'ready.
I used to own an 82-Q. Many, many years ago I was driving through Harrisburg, Illinois back when Illinois Route 13 ran along Poplar Street. I happened to glance over at a building and saw a cathedral radio in the window. Turns out it was an antique shop; I went back, went in, and bought the 82-Q for $75.
--
Ron Ramirez
Ferdinand IN
Posts: 4,702
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
In what condition is the cabinet? See if they will take less, $75-100, you never know, the fact it's a battery set goes against it in resale value, that and any early 30s radio is a harder sell these days.
Regards
Arran
Posts: 15,804
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Well....the set being a battery one is what kept me from calling this guy who is close to where I work.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
Michael, two years ago I also looked very superficially at battery-powered radios ... But when I tried several radios, I was very pleasantly surprised by the lack of interference and clean reception. And anode batteries can be very easily made from 13 batteries from transistor pocket receivers such as " Крона ", you probably still remember them.
Old Tube Radio Online Museum / Музей ретро радіо
https://www.youtube.com/user/RadioSvit?d...lymer=true
Sincerely Peter
З повагою Петро
Posts: 15,804
Threads: 553
Joined: Oct 2011
City: Jackson, NJ
Peter
I believe I posted my portable Zenith and Stromberg Carlson restoration on your website
So yes, I am familiar with the today's way of making the batteries; I used 9V for Anode voltage and D or C size for heaters.
This said, "Krona" (9V), even today's alkaline re-incarnation of it, are not good to power heaters - it will drain those within very few hours.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 03-30-2021, 04:19 PM by morzh.)
Users browsing this thread: 3 Guest(s)
|
Recent Posts
|
My last cabinet for this year
|
They are a nice looking radio, Stromberg.
I have a small tabletop octagon-dial one. It sounds surprisingly nice.
And t...morzh — 09:40 PM |
Philco 41-608 changer coupler
|
Different years but the same idea.morzh — 09:38 PM |
My last cabinet for this year
|
That’s a beauty!
:thumbup:klondike98 — 09:24 PM |
Philco 41-608 changer coupler
|
Hi Morzh,
I've searched using Mondial as the user name with various keywords such as 'coupler', 'motor', 'idler', 'p...alangard — 08:31 PM |
Philco 16B Parts
|
I think the chassis is painted.morzh — 08:13 PM |
Philco 38-2 Automatic Tuning
|
Honestrly, the original is quite acceptable and, it seems to me, can be cleaned.morzh — 08:11 PM |
Philco 41-608 changer coupler
|
Mondial left a thread about remanufacturing thois type coupler.morzh — 08:09 PM |
IF can wire size and Rubber mounts?
|
Are you talking about rewinding or rewiring?
For rewiring, meaning runnin wires to the coil from other components, the ...morzh — 08:08 PM |
12' Philco
|
I wonder who would be able to "no stoop" with this one.morzh — 08:05 PM |
IF can wire size and Rubber mounts?
|
Hello PHORUM members,
I am still working on restoration of my PHILCO 37-640. I want to start with rewiring the IF ca...georgetownjohn — 06:32 PM |
Who's Online
|
There are currently 3291 online users. [Complete List] » 1 Member(s) | 3290 Guest(s)
|
|
|
|