1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
RCA T8-14
TA Forbes
Deviate Emeritus
*****
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
#1

03-30-2011, 08:09 AM
Just got a "parts" T8-14 from an ARF deal, and was able to combine the speaker and a couple of tubes from it with my own T8-14 to produce a great looking and especially sounding set. This is an 8 tube, single 6F6 output/6F5 driver, 5Z3 rectifier 4.5 watt max output set. Additionally, I discovered that my set had an 80 where the 5Z3 belongs, so the "donor" 5Z3 was especially welcome.
Find
hbogie
Junior Member
**
Posts: 6
Threads: 1
Joined: Mar 2011
City: Ridley Park State, Province, Country: PA
#2

04-02-2011, 08:57 PM
A T8-14 was one of my first radio finds and still have it. Nice sounding and good looking set that I learned alot of the basics on. Does your set have the globe tuning knob still? Also curious if there are any knob labels on the cabinet other than the RCA Victor logo.... mine are either worn away or never had em and the logo is pretty faded. Otherwise it's a nice original survivor.

- Mike
Find
TA Forbes
Deviate Emeritus
*****
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
#3

04-05-2011, 11:38 PM
Hello, Mike: both cabinets only had the RCA logo on them, nothing else. Fortunately, both sets had the complete set of knobs including the "globe" knob. I just commented on your collection and especially the RCA sets. Pretty neat collection you have!!
The reception of my T814 is super. It is funny that these sets do not seem to be very popular on eBay and other radio sites.
Find
« Next Oldest | Next Newest »




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 38-7 Speaker
I have let this one sit because of other duties. Now I am back, and I have a couple of questions. I hooked up a Hammond ...tludka — 05:34 PM
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM
Philco 16B Parts
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM
Philco 16B Parts
Hi Dan, Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A...captainclock1988 — 03:43 PM
Philco 42-390, code 121 speaker
Using a 5W  1.5k  ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM
Philco 60 Squealing
I have taken out the 2nd IF and found a problem or not. I believe the coils are litz wire. There is a very small strand ...dconant — 02:13 PM
Philco 6K7
I am restoring a Philco 37-60. The am reception is very good, but the shortwave is very weak. Run 6 Philco removes the g...bobbyd1200 — 01:35 PM

[-]
Who's Online
There are currently 4454 online users. [Complete List]
» 1 Member(s) | 4453 Guest(s)
Avatar

>
  1. The PHILCO Phorum
  2. Various and Sundry Categories
  3. Other Radios (Non-Philco)