Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

48-482, what a great radio !
#1

Tonight I was listening to KMOX 1120 AM in St. Louis, MO. I was listening to the Cardinals playing the Milwaukee Brewers. I was listening with just the built in antenna of the radio to a station hundreds of miles away, with mountains in between. There was some fading, not to the point where the station was unintelligible, and, for the most part loud and clear. Earlier I had tuned up and down the dial, and found dozens of stations, probably more than 30 coming in clear. What a great radio ! On other nights I have had similar performance listening to shortwave as well as broadcast band, and with FM, the performance is even good through the day. The 48-482 was truly a beautiful design, both aesthetically, and from an engineering standpoint.

[Image: https://64.media.tumblr.com/f349e6d6c808...4931df.jpg]
#2

I noticed the FM range goes to 108. The German Graetz 4R-216 I'm working on was made in 1955 and the FM range goes to 100. Graetz didn't get to 108 for a couple more years. The owner wants me to adjust the tuning so it brings in 102.5.

Same with the 1951 Grundig I restored two years ago. It had a max at 104.
#3

Well, I guess that's what you get when you buy European radios from that period instead of U.S. made, that, and those odd European tube designations some of which have no U.S. equivalent. In my humble opinion, more trouble than they're worth, at least for U.S. restorers.
#4

Very nice! I have one in the closet for 'someday'.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4234 online users. [Complete List]
» 1 Member(s) | 4233 Guest(s)
Avatar

>