Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Help with a model...
#1

I was hoping someone could help me out with what model this is: [Image: http://i38.photobucket.com/albums/e113/b...CF1580.jpg]
#2

Looks like a 1941 Model 41-295X or 41-296X. Model number should be on a paper sticker on the inside of the cabinet.
#3

It is a 41-295X because if my eyes are not too bad I see 4 bands.
#4

Ah, yes, you are correct Grasshopper. Icon_wink

The 296 came in the same cabinet, but has only 3 bands. I should have looked at the dial more closely. Icon_rolleyes
#5

Talk about a brute of a radio, it should look great restored and sound just as well. I think this model was a cross between a vertical console and a horizontal console, tall and wide.
#6

Any estimate about the value of one? we're looking to sell it.
#7

Hi,

Quite a coincidence, since I saw one of these just this past weekend at a barn sale in Arlington, MA. I was tempted to buy it, but it had some missing/separated veneer (though not as bad as the one pictured here) as well as some deep scratches/gouges down into the veneer. With the guy firm at $60 I passed on it. Somehow I've got more than enough project radios sitting around and I stayed firm on my decision and left before I changed my mind. However, on a weaker day I may well have given in to that little inner voice calling upon me to "rescue it" and would have dragged it on home. Great radios when done up.

Paul
#8

After finally having a chance to look a lot more closely at the radio, i found a sticker that has 39-6844E on it. Could that be the model #?
#9

No Steve. That's the part number of that paper tag itself.

We already determined the model number earlier in this thread.

It's a 1941 Model 41-295X.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 46-420 Code 121 Reception issues
Welcome Eric, I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM
Philco 46-420 Code 121 Reception issues
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM
Philco 42-1008 conversion kit
Interesting. I haven't seen that before.klondike98 — 07:02 PM
12' Philco
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM
Shadow Meter Bulb
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM
Shadow Meter Bulb
Ok. Thanks for the correction.RossH — 03:09 PM
Model 28L
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM
37-60 revision 6
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM
Shadow Meter Bulb
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM
Hickok AC51 tube tester
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM

[-]
Who's Online
There are currently no members online.

>