Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 2620B Escutcheon
#1

Hello,

I'm from Belgium and speak Dutch.I will do my best to express myself in English.
I own a Philco 2620B radio which I would restore soon.The only problem is the escutcheon : the glass is still in great condition(no scratches) but the design (drawing) is missing in some places.

So, I'm looking for a good scan of the dial glass with the design to print it out on decal paper or with overhead transparancy paper to make a replacement.
Can someone help me?

Kind regards, Icon_smile Karel

[attachment=1] [attachment=0]
#2

Hi Karel and Welcome to the Phorum!
Actually that one looks pretty good. On the American sets those where used in 1935-36. Some are alittle different as they have the blank spot for the tuning indicator (shadowgraph) Unfortunately I don't have any sets with that dial.
Good luck!
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#3

Many thanks Terry for your answer. Icon_thumbup

It looks to me that these dials where also used on the Philco models 610B,620B and 625B but I'm not sure.
I think The Philco 2620B uses the same chassis of the 620 but it is an export model for France.The dial scale indicates GO and PO.Although they were made for the French market,it is hard to find one here in Europe.
Maybe someone has a 610,620 or 625 and can make me a good scan?

Kind regards, Icon_smile
#4

Welcome, Karel. Icon_smile You are doing a fine job expressing yourself in English, no worries.

I used to have a 2620 exactly like yours. I don't know how it made its way over here to the USA, but I wish I had kept it. Anyway, if memory serves, I believe the 2620 has a long wave band as well as standard AM (medium wave) and one shortwave band. The USA 620 did not have a long wave band; it has AM (medium wave) and two shortwave bands.

I don't know if I have a 610 or 620 escutcheon around here anywhere. That is what you would need for your 2620. If I run across one that is in good shape, I will scan it for you. But I can't guarantee that I even have one.

--
Ron Ramirez
Ferdinand IN
#5

Hello Ron,

Thanks for your reply. Icon_thumbup
You're right,the Philco 2620B has 3 wave bands.I saw it now on the dial scale GO (="Grandes Ondes"= long wave band),PO (="Petites Ondes"= medium wave band) and OC (="Ondes Courtes" = short wave band).
If you would have a similar escutcheon (scan),it would be fantastic! Icon_thumbup

Kind regards, Icon_smile Karel




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4095 online users. [Complete List]
» 2 Member(s) | 4093 Guest(s)
AvatarAvatar

>