What Tube tester would be best to buy
Posts: 88
Threads: 17
Joined: May 2018
City: Hayden, ID
I’m looking for a tube tester that works, without spending an arm and a leg for it. Also what would be the best one to look for? Especially for older Philco radios.
Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
Hickok 533. All of the good at a better price than a TV-7.
"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
I use an I-177 made for the signal corps for WW2; found it locally and had it calibrated all for about 200. Works great!
Posts: 88
Threads: 17
Joined: May 2018
City: Hayden, ID
Ok I bought a Jackson 648s for $236. So far it is working great. Going through my Philco 41-295x I found 5 bad tubes, I have them on order, so hopefully it will work now.
Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
(This post was last modified: 11-07-2019, 09:38 PM by nortonz.)
Posts: 120
Threads: 15
Joined: Aug 2017
City: Fort Worth
State, Province, Country: TX
Good choice! I like my 648S. There is a Jackson Model 648 tube tester manual that can be bought from https://vacuumtubesinc.com/index.php/boo...anual.html for $28.50. It's a bit pricy but useful.
Posts: 88
Threads: 17
Joined: May 2018
City: Hayden, ID
I found a free updated one on the web, plus a very complete tube substitution manual, it was also free. I can upload it to the Phorum is you need it.
Michael
Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
Posts: 23
Threads: 2
Joined: Oct 2020
City: East Greenbush
State, Province, Country: New York
I need a tube tester so I can restore my radios. Should I be considering a utracer3 or something more traditional like a Hickok model?
Posts: 337
Threads: 13
Joined: Apr 2019
City: Greenwood
State, Province, Country: Delaware
I had not heard of the uTracer; I have an old I-177 that I use for these old tubes...something like that will need to be calibrated, probably
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Personally, I think the tube tester which offers the best bang for the buck is the Heathkit TT-1, with its optional TT-1-A adapter. It is a dynamic mutual conductance tester, and is sometimes overlooked by those who want the Hickok testers.
I picked mine up at an auction of an old radio-TV repair shop in western Kentucky back in the 1980s. In more recent years, I fully recapped it, found the calibration instructions online, and calibrated it.
I consider it to be the best two dollars I ever spent.
--
Ron Ramirez
Ferdinand IN
Posts: 23
Threads: 2
Joined: Oct 2020
City: East Greenbush
State, Province, Country: New York
Am I correct that the consensus is a conventional tube tester is preferred to a curve tracer?
Posts: 15,444
Threads: 539
Joined: Oct 2011
City: Jackson, NJ
To repair radios you do not really need a curve tracer. If you are into stereo amps, that might be justified; else a mutual conductance tester is all you need. And some would argue that even that is too much.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,472
Threads: 89
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello nortonz,
My self I use a Precision 920 and a B&K tube tester and some other handy test equpment to have is VTVM plus Signal tracer and Signal generator.
Sincerely Richard
Posts: 320
Threads: 30
Joined: Jul 2017
City: Hay Lakes, Alberta,Canada
If you're in Canada, a Stark 9-66 is one of the best testers built/sold here; Stark used Hickok patents.
Posts: 23
Threads: 2
Joined: Oct 2020
City: East Greenbush
State, Province, Country: New York
Thank you for the help. Now I know how to proceed.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
40-150 General questions
|
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
40-150 General questions
|
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM |
40-150 General questions
|
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM |
40-150 General questions
|
Hi Kevin,
No, I don't but I like your Quote about being a good electrician. The way I look at it is "The fact ...MrFixr55 — 08:06 AM |
Philco 38-7 Speaker
|
7K should be fine. While not a perfect match (This transformer is meant for 6V6 tubes), Antique Electronic Supply (AES)...MrFixr55 — 08:03 AM |
40-150 General questions
|
I discovered a stamp on the underside of the breadboard on my Philco 40-150. It is"56-1417' in black ink with numbe...Kevin_D — 07:14 AM |
Philco 38-7 Speaker
|
FYI the Impedance of the HR20 (the one I have) secondary of the audio transformer is 5 ohms. The 38-7XX speaker is suppo...tludka — 04:22 PM |
Philco 38-7 Speaker
|
Yeah, don't use the transformer currently on the H-20 (Dopf, I thought "H20, is that new technology, a speaker usin...MrFixr55 — 03:51 PM |
Who's Online
|
There are currently 2449 online users. [Complete List] » 1 Member(s) | 2448 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|