Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

S-7 Speaker rebuild or replace
#1

Hi everybody,

I’ve got a 37-60 with an S-7 speaker that needs help. 

   
   
   

The field coil resistance tests well at 1197k ohms. 

I’m not sure if I should try to rebuild this one, or seek a replacement. What do the wiser heads here have to say?

Thanks!

mbhdesign
Michael Hennessey
#2

Contact Rich Stamer at Sound Remedy. Icon_thumbup

http://www.soundremedynj.com/

--
Ron Ramirez
Ferdinand IN
#3

Ok, Ron! Thanks.

mbhdesign
Michael Hennessey
#4

As longa s the FC is OK, which it seems to be, I agree with Ron.

And Rich is on the mend and has just done a beautiful job on my 16's 10" speaker.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

Hello Michael ,
It sounds like you have this covered !
I just got done repairing a speaker this week for one my sets .

Sincerely Richard
#6

Thanks again, guys! Glad to have your experience and encouragement on this. Much appreciated as always!

mbhdesign
Michael Hennessey




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4040 online users. [Complete List]
» 3 Member(s) | 4037 Guest(s)
AvatarAvatarAvatar

>