Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x

Thread Closed

Philco Model 118X cabinet
#1

Seems I have a variation of the 118X cabinet that I have never seen before.  All of the Photos I have seen are slightly different on the top end of the cabinet.  Seems like this may have been a change between earlier to late versions of this cabinet.  Does anyone     have any InSite?

Thanks

Sam

Philco's: 86 Lowboy 90 Highboy 95 Highboy 76 Highboy 112X Console 118X Console 41-265 Console 41-608P Console 52GC 370 LZ 512 20 Baby Grand 70 Baby Grand 71B 52B 118B 60B 84B 610B 37-89B 38-10T 38-35B 41-221CI 42-321T 46-1203 48-214 48-206 49-506
#2

It seems I've seen a photo of that cabinet variation before.

Is this a Canadian version (3118X)?

If not, then it must be a factory variant.

Some Philco cabinets were produced by more than one furniture maker. It could be that Philco changed the design during production, or else one of the third party cabinet makers changed the specs on their own and produced this variant. We can't know for sure since everyone involved with production of these cabinets are all now deceased.

When I get a chance, I'll look in Furniture History and see if more than one company produced this "X" cabinet.

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron, I appreciate your in sight. There is a picture of the Canadian 3118X on page 57 of your
Philco book. it is not the same. On page 48 it gets closer on the top decorative area in front for the model 18X but then the bottom is different. Maybe just a factory or third party change up.

Philco's: 86 Lowboy 90 Highboy 95 Highboy 76 Highboy 112X Console 118X Console 41-265 Console 41-608P Console 52GC 370 LZ 512 20 Baby Grand 70 Baby Grand 71B 52B 118B 60B 84B 610B 37-89B 38-10T 38-35B 41-221CI 42-321T 46-1203 48-214 48-206 49-506
#4

If the chassis has a brass data plate riveted to the rear apron, or the tube shield on the 1931 models, then it's either an export set, or a Toronto made Philco. The U.S sets seem to have used paper labels on the chassis, with the exception of the 1928-29 models, maybe some of the 1930 sets as well. In any event I have run into variations in Canadian built Philco cabinets as well, I think one of mine was built by Thomas (or some other firm) in Woodstock, Ontario, another I saw was built by McLagan in Oshawa. Woodstock is near London, which was the H.Q of Sparton of Canada Ltd., so Thomas built a lot of Sparton cabinets, they are still in business making school busses. Philco Products Ltd. of Canada may have made their own cabinets as well, but I haven't been able to confirm or deny it, given what most manufacturers did at the time I would guess not. 
Regards
Arran
#5

Great infor thanks.  This set has a paper label on the back skirt


Attached Files Image(s)
   

Philco's: 86 Lowboy 90 Highboy 95 Highboy 76 Highboy 112X Console 118X Console 41-265 Console 41-608P Console 52GC 370 LZ 512 20 Baby Grand 70 Baby Grand 71B 52B 118B 60B 84B 610B 37-89B 38-10T 38-35B 41-221CI 42-321T 46-1203 48-214 48-206 49-506




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM
54C Complete Teardown/Rebuild
The main problem with adding a Bluetooth input is that this set lacks a traditional power transformer to isolate it from...radiorich — 11:19 PM
54C Cabinet Refinish
I started stripping this cabinet before it got super chilly out because I knew I wasn't going to be able to work on ...glyphmon — 11:18 PM
54C Complete Teardown/Rebuild
While I'm waiting to wrap up the final steps on my wife's Silvertone 2014, I started disassembly on the next project.  O...glyphmon — 11:07 PM
Preliminary work on wife's Silvertone 2014
Hello roy, that great news glad it worked out for you !! Sincerely Richardradiorich — 10:50 PM
Preliminary work on wife's Silvertone 2014
Safety caps arrived today.  Soldered one in and had a successful first power-up.  No magic smoke escaped and it tunes in...glyphmon — 09:53 PM

[-]
Who's Online
There are currently 1367 online users. [Complete List]
» 1 Member(s) | 1366 Guest(s)
Avatar

>