|
Philco 38-10 faux finish?
09-19-2023, 05:16 PM
I just obtained a 38-10 that although quite dark, the cabinet is in good shape. Is the 38-10 a model that has the faux finish? I’m not experienced enough to tell from just looking at it and I don’t want to do anything to it until I know.
09-19-2023, 05:46 PM
Sure looks like it. I've wiped them down w/a soft cloth and oms to clean off dirt and smoking residue. And then resprayed w/sanding sealer (a few coats). Do any t/u work and respray w/gloss. Looks like new.
GL w/your new project! When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got it! Terry 
09-19-2023, 06:15 PM
Hello Phil27,
Yes it is faux finish I have that exact radio in my collection and it is my next project for a full chassis restoration my cabinet is in great shape ! Sincerely Richard 
09-19-2023, 07:25 PM
Just for future reference, our library has a list of the photofinish models. See:
https://philcoradio.com/library/index.ph...otofinish/
09-19-2023, 07:35 PM
Thanks very much. I’ll clean it up as best I can. Appreciate all the replies!
09-19-2023, 08:23 PM
Hey Bob,
That's pretty slick! That's the trick abt the library you gotta know where to look to find the right stuff. When my pals were reading comic books I was down in the basement in my dad's workshop. Perusing his Sam's Photofoacts Vol 1-50 admiring the old set and trying to figure out what all those squiggly meant. Circa 1966 Now I think I've got it! Terry
09-19-2023, 10:22 PM
It's very likely dark because of layers of dirt, wax, oil, maybe even tobacco tar on the cabinet, GoJo cream hand cleaner, the non grit type, does a good job for cleaning dirt from wood cabinets, and many other things too.
Regards Arran
09-19-2023, 10:38 PM
Hello Phil27,
Here is a Photo of mine ! Since this photo I bought a escutcheon outer ring from Ebay this is my next project to hit the bench the chassis has not been restored yet . Sincerely Richard
10-08-2023, 12:07 PM
I tried several methods to brighten the face up, nothing worked satisfactory for me…so I sanded off the faux finish, bought some walnut veneer and edging strips from Lee Valley and this is the finished product.
Thanks again for all the helpful input! 
« Next Oldest | Next Newest »
Users browsing this thread: 1 Guest(s) |
|
|
.![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
