Posts: 5,092
Threads: 270
Joined: Nov 2012
City: Wilsonville
State, Province, Country: OR
The following advice came to us through the webmaster email address. The poster (Vickie) could not navigate the phorum but wanted to offer the advice so here it is...
"Wanted to give advice on how to get mirror Finnish on bakelite but your website to hard to use, so tell you, my friend has a ford pop with bakelite dash,was oxidised looking old, got him to 4000 grit sand it then I polished it on my bench grinder I have two wheels one sisal, one loose calico, used blue plastic compound wax stick,came up better than new , but it takes some time as you have to keep it moving so as not to make to much heat in one spot, hope this helps restoring anyone who wants shiny bakelite"
Posts: 4,384
Threads: 412
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Interesting info, I have also heard that one must be real careful when sanding Bakelite, particulate matter.
Paul
Tubetalk1
Posts: 698
Threads: 8
Joined: Apr 2018
City: S. Dartmouth
State, Province, Country: MA
There are different formulations of Bakelite. These variations make it sensitive to UV, alkali, to the type filler, size of filler and amount of filler.
The most important caution in re-surfacing Bakelite is be aware when filler is reached. By molding technique, the filler migrates away from the surfaces leave the opaque resin on top. Sand through the resin and reach the filler/resin, no polish will help at that point. The solution is to use an opaque toning lacquer, at that time the desired tone can be used or a lacquer solid color paint.
The same model radio can be expected to polish in the same manner, but another model/brand may react differently, such as have filler very close to the surface.
GL
Chas
Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
Posts: 15,855
Threads: 555
Joined: Oct 2011
City: Jackson, NJ
I used shoe polish.
Good enough.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,617
Threads: 102
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Guys,
Yes , I have heard people use shoe polish like Morzh talks about .
I have never tried sanding it .
Sincerely Richard
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
I have used Tempo automotive wax paste made in the Czech Republic several times and have had excellent results. Before polishing, you need to sand with fine automotive abrasive paper size 1000, then wash, dry and polish with Tempo wax paste. The protective wax layer will keep the shine and great look for a long time
Old Tube Radio Online Museum / Музей ретро радіо
https://www.youtube.com/user/RadioSvit?d...lymer=true
Sincerely Peter
З повагою Петро
(This post was last modified: 06-07-2024, 02:40 PM by RadioSvit.)
Posts: 1,617
Threads: 102
Joined: May 2008
City: Omak
State, Province, Country: WA
Hello Peter,
Glad to hear from you and Yes one the groups on facebook that I am part of one the members has auto detailing business and he also uses car wax and buffer to bring the shine back !
Sincerely Richard
Posts: 1,192
Threads: 25
Joined: Jan 2014
City: Wellborn Florida
Have used armor all the stuff for making tires shine. David
Posts: 1,617
Threads: 102
Joined: May 2008
City: Omak
State, Province, Country: WA
hello David,
I have never used that before I have General Electric radio that will need a lot polishing is finish is flat and has streaks too .
Sincerely Richard
Posts: 1,192
Threads: 25
Joined: Jan 2014
City: Wellborn Florida
The armor all just soaks right in the bakelite. David
Posts: 698
Threads: 8
Joined: Apr 2018
City: S. Dartmouth
State, Province, Country: MA
Quote:The armor all just soaks right in the Bakelite.
The surface has been "cleaned" in the past and the top "layer" is gone. Now down to the porous filler material.
A build type polish with a wax may work, if it does not then some sort of Artists, spray acrlic/sealer. Last resort but with through cleaning is opaque lacquer toner, that, will cover all sins...
Pliny the younger
“nihil novum nihil varium nihil quod non semel spectasse sufficiat”
Posts: 1,009
Threads: 41
Joined: Feb 2015
City: Roseville, MN
I revived a Bendix bakelite cabinet with Howard Restor-A-Finish after cleaning with 0000 steel wool then oms. It took 4 weeks for the Howard to totally dry. Sprayed it with clear lacquer. It wasn't as shiny as original but it might have been better with beeswax. The marbling really came through nicely.
Users browsing this thread: 7 Guest(s)
|
|
Recent Posts
|
|
Using a loop on a long wire 60B
|
| It could be hit or miss getting a salvaged loop to resonate for the desired station and it will require some sort packag...Chas — 02:50 PM |
|
Using a loop on a long wire 60B
|
| I searched but couldn't find an exact answer. I'm giving my son my 60B that I electrically restored some 8 years ago (I...JohnCT — 12:49 PM |
|
38-10T chassis Restoration begins
|
| Hello Mr Fixr,
years ago I had to wash two vcrs one was used by the school disctrict and the other was a family who had...radiorich — 10:53 AM |
|
38-10T chassis Restoration begins
|
| My dad's manager took the NRI course many years ago and gave me his course booklets. One of the course lessons was on r...MrFixr55 — 10:20 AM |
|
Philco 38-690
|
| There is a 38-690 for sale on eBay. Nice looking radio. Do those resonators/clarifiers really do anything?dconant — 09:34 AM |
|
Philco 38-2 Low Volume
|
| I have done the RF and magnetic tuning alignment. The magnetic tuning really does its job quite well. Had to do three tr...dconant — 08:41 AM |
|
38-10T chassis Restoration begins
|
| Hello Dan,
Very cool !!
morzh ,
I have seen people put computers and other items in the dish washer !
Sincerely Ri...radiorich — 11:26 PM |
|
38-10T chassis Restoration begins
|
| Arran
I also washed tuning caps in dishwasher and in soap water without having removed the micas.
Upon drying, it wa...morzh — 02:00 PM |
|
38-10T chassis Restoration begins
|
| Hi Richard, I used to build houses and we used a lot of those gold flake counter tops. We even used gold flake ceramic t...dconant — 11:11 AM |
|
38-10T chassis Restoration begins
|
| Hello Guys,
Don't mind my 1950s kitchen countertop and funny thing about that countertop it has little what looks like ...radiorich — 10:53 AM |
|
Who's Online
|
There are currently 2232 online users. [Complete List]
» 1 Member(s) | 2231 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
