Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

philco 15 x grille cloth
#1

just purchased a philco 15 x in really nice origional condition but grill clothe is showing wear.does any one know which pattern of cloth is most like the origional
#2

Pattern 40 from Radio Grille Cloth Headquarters is about as close to the original as you are going to get. Not exactly the same, but close:

http://www.grillecloth.com/

--
Ron Ramirez
Ferdinand IN
#3

thanks Ron i will get that one
#4

Older Philco consoles can be "spruced up" nicely by using a velvet elvis painting for the grillecloth. I installed tiny black lights above the elvis painting grillecloth on my otherwise drab Philco model 201X to highlight the glow in the dark paint. It looks exxxxcelent......
#5

i am sure that is a dazzling and interesting look and i too am a elvis fan but i wanted the look of 1933 in this classic console.
#6

Another way to improve the looks of them is to affix baseball card stickers, post office wanted posters, or refrigerator magnets to the cabinet. Maybe a good way to realize the 1933 look would be to decoupage 1933 newspaper articles to the cabinet???

P.S. Don't take ANY of what I said seriously! BUT believe me, I have seen some awful things done to an otherwise nice radio for only God knows why. The one that I think appalled nearly all of us here was the fellow on eBay that dismantled a Philco 116B non shouldered tombstone cabinet and sold the cabinet and chassis parts. Oy vay !!!!

The 15X is a set that I would love to have someday! Good luck with it!
#7

yeah... cabinet parts.


Quote:shipping is too expansive so I destroyed this otherwise perfectly preserved rare radio to prevent any interested buyers to pay me for shipping it. Maybe the parts will sell off?

If I recall he sold the tubes and that's about it.

-Mars
#8

the previous owner removed most of the tubes from this one i found one in the socket and two 37 loose on top of the chassis and they tried to connect a rca jack and unhooked the big speaker and tried to connect a external speaker. luckly no permanent damage to anything.i would like to clean and keep the origional grille cloth but this is fading and worn to the point where i want to see what a new one looks like. the origional finish is still very presentable.found this one at a auction and there was little interest in it.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently 4005 online users. [Complete List]
» 3 Member(s) | 4002 Guest(s)
AvatarAvatarAvatar

>