Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 91 Schematic
#1

Hello, I found a schematic here but I would like the service manual that would have the parts list and locations as well as alignment instructions. Can someone help me out with that? I found another one on Tom Bavis's site but the alignment instructions are not there.

I just recently picked this radio up and it appears to have all original tubes (globes with Philco paper label) and they test very good. The cabinet needs a lot of veneer work. Looks like it got wet. The speaker is frozen. I will do a separate post for that.

It will a while before I get to this radio. Looking forward to it though.

Thank you,
Dan
#2

Try this link:
https://philcoradio.com/library/index.ph...ers-vol-1/

Pages 6 through 9 and 21.
#3

Thank you Rob. Hopefully that will work when I get that far.

Dan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Hickok 288x
One problem i noticed is there is no real voltage on the 31 caps, 20uf elec. On the probes, good machine X1=8ohms X10...daveone23 — 02:50 PM
Replicating (dogbone) resistors what method have you used ?
John did you see the domino style capacitors that he made too. No, I did not see those Richard. I'll have to try and...Eliot Ness — 02:19 PM
Philco 89B code 123 newbie
Back to working on this, pretty much everything is done minus the RF coil, which I'm putting off until last.  Thanks for...Kurt P — 02:07 PM
Does the 20 Deluxe use photofinish?
I recently bought a can of oms and it now says Lo-odor mineral spirits. When I use citrus stripper I leave it on for...RodB — 11:09 AM
Does the 20 Deluxe use photofinish?
It's on a scale of how bad is it compared to... Naphtha, chlorine bleach, mek, and lacquer thinner it's odorless.Radioroslyn — 10:26 AM
Does the 20 Deluxe use photofinish?
Yeah, always wondered why they call them spirits "odorless". It sure enough smell like a gas station.morzh — 10:10 AM
Does the 20 Deluxe use photofinish?
I usually don't do any sanding till all the stripping is done. The veneer on the cabinet is thin and it is easy to sand ...Radioroslyn — 09:49 AM
HiFi (Chifi) tube amp build - but my own design.
As I remember it, the shock from that B+, about 250VDC, felt worse than the shocks I experienced from 220VAC.morzh — 09:14 AM
Hickok 288x
They worked for 85 years as .05's and my other machine which operated perfectly has them. Doubt thats the issue. What ty...daveone23 — 09:01 AM
462ron
LOL@ MrFixr. I remember an encounter with my first tube radio.. I think I have posted this before. Back when I knew just...462ron — 08:07 AM

[-]
Who's Online
There are currently no members online.

>