[Jonnym]

Hi all, I am a newby. I own a 1931 vintage lowboy with a model 96 chassis. The volume control works but only goes from medium to loud. It will not allow me to turn it down to a pleasant volume. Can the control be cleaned to fix or does it need to be replaced? I have a cool add for the radio from a 1931 Saturday Evening Post magazine .Thanks!

[radiorich]

Hello Jonnym ,
First all I wanted to welcom you to the Philco Phorum .

As this set goes has anything been done to it recently like any new parts added ?
because if not that might be your issue anyway we would need more information .


The volume control is it scratchy sounding when turned ?

Sincerely Richard

[morzh]

The bottom lead of the vol ctl in 96 is connected to the Center Negative through a 70K resistor (part of an RC filter).
So it is never really at zero vol, but do check that #33 resistor to be 70K or near. If it is much higher or open, the vol will remain high.
https://philcoradio.com/library/index.ph...chematics/

Also see if the potentiometer is open. If it is continuous, even 1M or so, it is OK to use. Clean it (it is a wide paper carbonized band with a brass roller as a wiper) without rubbing it with anything: just spray Deoxit F5 (Fader lube) and let dry; DO NOT use contact cleaners like Deoxit D5.

This is my 96 thread from beginning of this year.
https://philcoradio.com/phorum/showthread.php?tid=25548

[klondike98]

Welcome to the Phorum!



...and in addition to the annotated schematic that Mike linked to there is the factory schematic info at:
https://philcoradio.com/library/download...l.%201.pdf

[Jonnym]

Thanks everyone, I will pull the chassis out of the cabinet and do some checking. 
  The volume adjustment is not “scratchy”.