6 hours ago
Hello,
I thought I would post my findings on my bad oscillator tickler coil. There were 27 turns on the outer coil between pins 1 and 2 going from pin 1 clockwise starting from bottom (pins) to top. I wound it with #38 wire. Works good. Funny there was no green corrosion but break was very close to pin 1. Guess I could have removed a winding but since I was already in there I decided just redo it.
Sorry no picture as I forgot.
Dan
I thought I would post my findings on my bad oscillator tickler coil. There were 27 turns on the outer coil between pins 1 and 2 going from pin 1 clockwise starting from bottom (pins) to top. I wound it with #38 wire. Works good. Funny there was no green corrosion but break was very close to pin 1. Guess I could have removed a winding but since I was already in there I decided just redo it.
Sorry no picture as I forgot.
Dan