Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Sondowner, yes, email received, and I thank you.
Jayce - yep, an additional building could be helpful for many of us...
--
Ron Ramirez
Ferdinand IN
Posts: 244
Threads: 24
Joined: Feb 2006
Sweet Ron. Every time you open those doors you want to say TA DA!
Phil aka Philbert Q. Desenex - Twin Cities, MN
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Ron Ramirez Wrote:Jayce - yep, an additional building could be helpful for many of us...  My trailer is beginning to feel more and more like a game of Tetris.. and I can't get the peices to fit! Ack!
No matter where you go, there you are.
Posts: 299
Threads: 107
Joined: Mar 2011
City: Sheboygan Falls,Wisconsin
Congratulations Ron on your new finds as well as your college graduation  Both are terrific accomplishments!!
Posts: 3,152
Threads: 56
Joined: Apr 2011
City: Lexington, KY
Congratulations Ron! I know you worked hard on your degree and those radios are a very nice graduation present. Your 37-690X is a gorgeous radio!
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 7,300
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Boy oh Boy you've got yourself a couple of real beauties!!! Hope there easy restoration with any major problems.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 1,703
Threads: 55
Joined: Sep 2005
City: Evanston, IL
Unbelievable Haul....Once in a Million Years.
El Dorado for you!
Posts: 4,435
Threads: 419
Joined: Jun 2011
City: Boston
State, Province, Country: Massachusetts
Hi Ron:
Is there a story(ies)you have about acquiring these two corkers? There is usually always a good story with a neat find. I would understand not wishing to reveal your sources!
Congrats.
Tubetalk1
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Posts: 4,875
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Ron;
Assuming that the 37-690 is unrestored electrically will you be posting a thread of that restoration when the time comes? Have you thought of making a series of Bob Andersen style restoration videos to document it? It would be neat to see and hear one of those 37-690s in operation? It's a shame that I am nowhere near that 37-690 on craigslist but I may find one around here, who knows?
Regards
Arran
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Thanks to everyone for the well wishes, I really appreciate your kindness.
Paul - as I mentioned earlier in this thread, I bought myself the 37-690 as a graduation present for myself, having earned my associate degree in Information Technology, Summa Cum Laude, Phi Theta Kappa (3.974 GPA). Not bad for an old man.
Tom (TA) - That is a very nice thing to say, thank you!
Arran - Sorry, I don't have a video camera. (Although, I think Debbie might have one?) Anyway, this 37-690 is working and has been worked on in the recent past. However, at some point I am probably going to go through it again. I looked under the upper chassis and found that none of the bakelite blocks had been rebuilt; new yellow Mylar caps were connected across the bakelite blocks instead. This set deserves a proper electronic restoration, and as time allows, it shall receive one. I guess I had better start saving those old wax paper caps for when the time comes to do this, else I'll be in the same boat as Etech when he redid his 38-690. I usually don't bother restuffing wax paper caps. But on a really nice set such as this one, yes, I will take the extra effort to do this.
--
Ron Ramirez
Ferdinand IN
Posts: 237
Threads: 24
Joined: Dec 2007
City: Gladwin, MI
Ron Ramirez Wrote:This set deserves a proper electronic restoration, and as time allows, it shall receive one. I guess I had better start saving those old wax paper caps for when the time comes to do this, else I'll be in the same boat as Etech when he redid his 38-690. I usually don't bother restuffing wax paper caps. But on a really nice set such as this one, yes, I will take the extra effort to do this.
Yes, the proper values are kind of hard to come by. Fortunately, due to the generosity of our antique radio communities, out of 24 missing Philco paper caps I have only these five still missing.
Quantity.....P/N.................Value
1----------------30-4334----------.004uF
1----------------30-4419----------.02uF
2----------------30-4449----------.03uF
1----------------30-4512----------.05uF
If I am unable to find these last five, I will use substitutes. I do have most of the correct values to replace these, just not the right part number.
Ed
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Studebaker/Philco AC-2687 car radio
|
Arran,
Thanks for checking you manuals.
I appreciate that. Let me know what you find.
PhilPdouglaski — 08:46 AM |
Studebaker/Philco AC-2687 car radio
|
I have some car radio service manuals, Riders I think (not to be confused with the big blue binders), so I may see if on...Arran — 01:20 AM |
Philco model 40-100
|
Greetings;
Here is an update, I found a listing on fleabay for a similar chassis to yours, and it has a photo of what...Arran — 12:58 AM |
Philco model 40-100
|
Greetings;
I think I may have found a clue as to what is missing, from a search I made, there is a rear view of the c...Arran — 12:12 AM |
Philco model 40-100
|
I recently acquired a Philco model 40-100 farm (battery) radio. The radio was in very good condition except the red on f...mhamby — 05:59 PM |
Studebaker/Philco AC-2687 car radio
|
Hello, Richard
the radio is an AC-2687 Studebaker model. The Philco model is S -5323 and the chassis p/n is S-5523Pdouglaski — 11:52 AM |
48-482 rear panel help
|
The 48-482 is an AC only set as well, featuring a power transformer. While the transformer shouldn’t get “hot”, it is ye...jrblasde — 11:12 AM |
Studebaker/Philco AC-2687 car radio
|
I gave a Chrysler/MoPar car radio from 1954, it was made by Philco, and it uses two chassis, one has the power supply an...Arran — 11:06 AM |
48-482 rear panel help
|
Hello keithchip. You could make a hardboard back for the set, but make sure you provide plenty of ventilation holes in ...GarySP — 11:04 AM |
Studebaker/Philco AC-2687 car radio
|
Welcome to the Phorum, Phil! Lots of friendly help here to assist you along the way! Take care, - GaryGarySP — 10:55 AM |
Who's Online
|
There are currently 829 online users. [Complete List] » 2 Member(s) | 827 Guest(s)
|
|
|

|