Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12, 2025) x


41-608
#1

Hello All
Got a 41-608 with a BOL that I re-capped and has been playing well. I have A ceramic cartridge and recently high notes are distorted and it seems to not have the power it had but the radio plays strong. Any suggestions are appreciated
#2

Hi Philco4Me,

Are you piping the phono through the same preamp connection that was used for the BOL pickup? Are you using the transformer that was used for the BOL?

Obviously, there are 2 possible scenarios, either the cartridge or the circuitry. Try connecting the cartridge to another amp. The aux input should work for many ceramic cartridges. Alternatively, connect another turntable with a ceramic cartridge or other external source to the phono input. However, you need to be able to attenuate the signal. The headphone output of a CD player should work.

Ceramic cartridges could go bad. The stylus could have become damaged. The tube could have become gassy. You coud swap the preamp with the 1st audio amp if both are type 7C6. If radio performance suffers, then the tube swapped into the 1st AF section was bad.

Hope this helps.

"Do Justly, love Mercy and walk humbly with your God"- Micah 6:8
"Let us begin to do good"- St. Francis

Best Regards, 

MrFixr55
#3

Hello
I am not using the transformer I am going direct from the turntable to the amp. I will Try to switch the tubes and see what happens. Thank you
#4

So only one 7c6.
#5

This may seem like an odd question but is this with the original 78 RPM record player, or is this a replacement one you are working with? If you still have the original Beam Of Light machine I would hang onto it, the pickup can be rebuilt, and they are rather neat to see in action with the glowing headshell.
Regards
Arran
#6

Yes it’s the original bol.
#7

Oops it has two 7c6 I will Swap them and see if anything changes




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco P45-6365 Universal Transformer Instruction Manual
Can anyone guide me to where this may be found?GRG — 03:00 PM
54C Complete Teardown/Rebuild
I don't think that I have encountered a 12Z3 before, curious how it uses one of those but includes a #43, which is a 25 ...Arran — 02:17 PM
HiFi (Chifi) tube amp build - but my own design.
It's the other forum. I'm also in DIY, but mostly read there. Honestly, I kinda jumped into this without much thought to...TV MAN — 10:43 AM
Philco 71 Code 125
Hello,  I am in need of a schematic for this radio. Mine has the three separate circular tube shields and a shadow me...dconant — 08:06 AM
Stromberg Carlson 1500 Squeal
And life just keeps getting more complicated.dconant — 07:57 AM
54C Complete Teardown/Rebuild
Hello Roy, here is this one sincerely Richardradiorich — 12:45 AM
54C Complete Teardown/Rebuild
Richard, Had grabbed it already but thank you just the same.  I find myself wanting to find some way to block out the...glyphmon — 12:03 AM
54C Complete Teardown/Rebuild
Hello roy, here is a link to the schematic . Sincerely Richardradiorich — 11:54 PM
54C Complete Teardown/Rebuild
Richard, The Silvertone 2014 also is a transformerless set, so I am incorporating a 1:1 600 ohm audio isolation transfo...glyphmon — 11:37 PM
Preliminary work on wife's Silvertone 2014
Did an alignment today which was interesting.  IF alignment went great, almost all was already spot-on.  Adjusting on th...glyphmon — 11:35 PM

[-]
Who's Online
There are currently 1816 online users. [Complete List]
» 2 Member(s) | 1814 Guest(s)
AvatarAvatar

>