Have gone over to the other side!
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
A friend of mine gave me one of the red ones that didn't work. So I had to fix it!! Then they started multiplying. What's a fella to do. Good playing sets!!
http://www.flickr.com/photos/53710524@N0...hotostream
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
Whats this world comming to?
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
It was just a short trip over to the other side. My dad worked the Motorola from the mid 60's in to the 1980's. He was on the 2 way radio side not the entertainment side of things. When is see something interesting that's Motorola I pick it up. In this case the first one was free! The other two I found on epay. The Airboy is kewl but I haven't seen a nice one that had a fair price.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
It seems to be always one of the electrolytic caps. I have a little Philco that is absoute dynamite.
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
No shame in have a few transistor radios in the collection, especially the neat ones like those. They definitely take up less space and weigh far less than the hobby I have crossed over to in the past year's time. I have crossed over into the vintage arcade game side. 
No matter where you go, there you are.
Posts: 262
Threads: 27
Joined: Jan 2010
City: Rochester, NY
I confess to having a few little guys. Got a couple different Sony Watchmans and even started collecting old Mics.
Man i feel better. Maybe the mrs will let me skip church tomorrow!
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Don't skip church. I always feel better when I go!!
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
That's all I had to do on this one was replace 4 caps and fix a few broken wires on the loop antenna. A bit of a pain as the wire is very small. The original battery was a 226 which looks like a C cell with snaps on each end and it's 9v. The newer 9v battery would fit but it would put a bit of stress on the plastic cabinet. So I used a pair of vice-grips to shrink the width of the battery. It wasn't very pretty but now I've got a bit of space in the battery space with out stressing the case.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
7estatdef Wrote:It was just a short trip over to the other side. My dad worked the Motorola from the mid 60's in to the 1980's. He was on the 2 way radio side not the entertainment side of things. When is see something interesting that's Motorola I pick it up. I can't fault you for picking Motorola. I'm a bit partial to them myself, and for a similar reason. I'm a tech on the two-way side of the house too.
Dave
Posts: 7,248
Threads: 266
Joined: Dec 2009
City: Roslyn Pa
Back in the 70's I did some work for a dealer doing installs of motrac's mocom70's and every once in a while al T Power or TwinV for a cheap skate that didn't want to upgrade his 20 yr old stuff.
Terry
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
Posts: 91
Threads: 9
Joined: Feb 2010
City: Macon, GA
Believe it or not, I still see some of those dinosaurs from time to time. I've got a few Mocom 70's that still look brand new.
Dave
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Terry: if you want to have some fun, the next time your wife is giving you a hard time, run over, grab one of your transistor sets, flip it open, and yell into it "Quick, Scotty, beam me up!!!"
Posts: 2,023
Threads: 365
Joined: Jun 2010
City: Dover, OH
TA Forbes Wrote:Terry: if you want to have some fun, the next time your wife is giving you a hard time, run over, grab one of your transistor sets, flip it open, and yell into it "Quick, Scotty, beam me up!!!"
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Cannot Adjust an IF Transformer’s cores
|
| The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
|
PT-6 antenna connections
|
| Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
|
PT-6 antenna connections
|
| Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
|
bridkarl
|
| I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| Joseph, now you are an engineer!!RodB — 06:37 PM |
|
PT-6 antenna connections
|
| Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
|
Cannot Adjust an IF Transformer’s cores
|
| It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
|
PT-6 antenna connections
|
| I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
|
40-150 General questions
|
| Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM |
|
Who's Online
|
There are currently 3675 online users. [Complete List]
» 2 Member(s) | 3673 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
