Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need help identifying old Philco mahogany cabinet.
#1

Today I found this old Philco mahogany cabinet at a thrift store. The model number is 10853-3 can anyone tell me what it is and what year it was made? If you need a better more detailed picture's let me know. thanks.
#2

Michael,
That isn't a good Philco model number.
Pictures will help.

Carl
Northern Panhandle, WV
#3

The actual model number will either be on a blue and white paper tag, glued to the inside of the cabinet and visible, or it may be black ink-stamped on the rear of the chassis with also a Code number possibly.

Pictures will help us help you.

Chuck
#4

Pictures submitted by the OP:

[Image: http://i326.photobucket.com/albums/k420/...0007-1.jpg]

[Image: http://i326.photobucket.com/albums/k420/...0006-1.jpg]

10853 is the number of the cabinet itself. Probably later than 1949, I am guessing it would be in the 1950-52 era. Plus, from the looks of the interior, it appears that it was originally a TV-radio-phono combination before being gutted. I do not have any photos or illustrations of any Philco radios or radio-phonographs that match this cabinet.

--
Ron Ramirez
Ferdinand IN
#5

This cabinet was like the first TV that my family had when I was a kid. We got it in 1956 (was told to be a 1950 model) - it was used and the Philco dealer installed a new picture and installed a tall external antenna all for $100.00. The TV was on the left side and the radio and record changer was on the right side as viewed from the front. When the TV failed I removed the TV and radio part. I installed a newer type changer and amp and my mother used that until she died in 2006. I still have the two doors partly because of the wood and the other because of the many hours of enjoyment that it gave me.

Tom B




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 60 Squealing
I just peaked it for the best signal at 600. NULL it for IF frequency, originally it would have been null for 500kh...Chas — 08:05 PM
Philco 60 Squealing
Wavetrap no longer matters.morzh — 05:19 PM
Philco 60 Squealing
Rod, I had checked out your suggestions but did not help. I did solder the ground rivets to the chassis as Chas suggeste...dconant — 04:52 PM
37-690 Bass Choke Replacement
Yeah, I know, Mouser and Digikey don't have "big iron" components. For some reason Philco was messing with the...Radiodial — 04:25 PM
37-690 Bass Choke Replacement
Yes, I just had to deal with that while repairing the 37-604 Philco. Exactly that value choke was gone. And the current ...morzh — 03:52 PM
37-690 Bass Choke Replacement
Ah, now where to find one. I've into this before on smaller sets, I now recall. Hammond makes one that is only rated...Radiodial — 03:27 PM
Philco 38-7 Speaker
Ask the admins to put them together. As for the renaming, while inside the thread, you simply press "New reply&quo...morzh — 02:23 PM
37-690 Bass Choke Replacement
This is the parts catalog. 32-7528 choke is 65H, 10mA, 2,250 Ohm inductance. Find a suitable one.morzh — 02:18 PM
37-690 Bass Choke Replacement
While troubleshooting the no bass amplification issue, I think I found the culprit. The choke #104 is reading 164K ohms....Radiodial — 01:42 PM
Philco 60 Squealing
Your IF transformers are tuned to the resonant frequency they were designed for. When you observe the bell curve they di...RodB — 01:35 PM

[-]
Who's Online
There are currently 3569 online users. [Complete List]
» 2 Member(s) | 3567 Guest(s)
AvatarAvatar

>