Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need help identifying old Philco mahogany cabinet.
#1

Today I found this old Philco mahogany cabinet at a thrift store. The model number is 10853-3 can anyone tell me what it is and what year it was made? If you need a better more detailed picture's let me know. thanks.
#2

Michael,
That isn't a good Philco model number.
Pictures will help.

Carl
Northern Panhandle, WV
#3

The actual model number will either be on a blue and white paper tag, glued to the inside of the cabinet and visible, or it may be black ink-stamped on the rear of the chassis with also a Code number possibly.

Pictures will help us help you.

Chuck
#4

Pictures submitted by the OP:

[Image: http://i326.photobucket.com/albums/k420/...0007-1.jpg]

[Image: http://i326.photobucket.com/albums/k420/...0006-1.jpg]

10853 is the number of the cabinet itself. Probably later than 1949, I am guessing it would be in the 1950-52 era. Plus, from the looks of the interior, it appears that it was originally a TV-radio-phono combination before being gutted. I do not have any photos or illustrations of any Philco radios or radio-phonographs that match this cabinet.

--
Ron Ramirez
Ferdinand IN
#5

This cabinet was like the first TV that my family had when I was a kid. We got it in 1956 (was told to be a 1950 model) - it was used and the Philco dealer installed a new picture and installed a tall external antenna all for $100.00. The TV was on the left side and the radio and record changer was on the right side as viewed from the front. When the TV failed I removed the TV and radio part. I installed a newer type changer and amp and my mother used that until she died in 2006. I still have the two doors partly because of the wood and the other because of the many hours of enjoyment that it gave me.

Tom B




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM
40-150 General questions
I think RobB has it right. It is a part number and looks like its stamped on the chassis and that wasn't something you ...klondike98 — 11:41 AM
40-150 General questions
It's most likely a part number. Most of Philco part numbers are in that format. I looked at the parts list for this mode...RodB — 08:10 AM

[-]
Who's Online
There are currently 3612 online users. [Complete List]
» 3 Member(s) | 3609 Guest(s)
AvatarAvatarAvatar

>