Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-630 Chassis Mounts
#1

Hello, looking for information on exactly the 37-630 chassis mounted to the cabinet. Rubber bushings, springs or a combination? I did a forum search but didn't find anything yet. Can anyone help? Thank you!
#2

See the attached picture, it seems that chassis is sitting on rubber bushes like any other radio. Icon_smile

Ash
#3

Have not had that specific set, but believe it is 2 rubber mounts that go over the "lugs" in the front (where the controls are mounted) of the chassis and 2 rubber mounts on the bottom of the back of the chassis.
#4

See the attached picture, for the front bushes for mounting.

Ash
#5

I did see a chassis photo and it did appear that there were rubber mounts at the rear. With that I'll start looking for replacements - perhaps Renovated Radios. Thanks for the info.

Mark
#6

I'd be surprised if Renovated Radios did not already have these. If not - and you have one to work with - he may work with you.

-Greg
#7

Thank you everyone!
#8

gvel Wrote:I'd be surprised if Renovated Radios did not already have these. If not - and you have one to work with - he may work with you.

Yes, if you have a fairly good shape part, Ed can make one for you. He did that on a couple of rubber tuner parts I sent him. Ed is a great guy and always willing to help Icon_wink

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#9

Unfortunately the original parts were not with the radio.
Thanks for the link to the pnones - I actually have a friend that wants me to look at his old phone.
#10

For phones that would be the place Icon_thumbup Ed will have the rubber mounts you need.

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 2959 online users. [Complete List]
» 2 Member(s) | 2957 Guest(s)
AvatarAvatar

>