Philco 60 tuning cap and chassis grommets-source?
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
This question is for the Philco 60 guys, as you've no doubt had this issue.
The grommets on this Philco 60 are understandably shot. Does anyone have a source, or hint about fabricating them? The chassis grommets look pretty easy. The tuning cap grommets a little harder.
Thanks,
lyle
I may not be very good, but I'm slow.
Posts: 411
Threads: 42
Joined: Sep 2008
City: Ironton Ohio
I usually go to Lowes and match up to wire grommets for metal boxes and for the chassis to cab I use rubber box feet also sold at lowes/home depo you may have to drill the hole larger on the feet. They have a whole isle of drawers full of stuff like that.
Todd
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
Thanks, Todd.
I'll take a look at Lowe's.
Appreciate your help,
lyle
I may not be very good, but I'm slow.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Have you tried Renovated Radios?
http://www.renovatedradios.com/parts.html#rubber
For the tuning condenser grommets: GSm-Tuner.
--
Ron Ramirez
Ferdinand IN
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
Thanks Ron,
I spent some time at their site, but just couldn't find a fit. I'll give it another peek. Maybe I missed something.
Thanks again and great Phorum, It's been really helpful to me and obviously many other fans of nice old radios.
lyle
I may not be very good, but I'm slow.
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
Thanks again, Ron.
I took another look and you're right. I've ordered my parts from RenovatedRadios.
Might take this opportunity to mention I've met some great people on this Phorum. I spent years on my own and wasted a lot of time.
Thanks for all your hard work.
lyle
I may not be very good, but I'm slow.
Posts: 797
Threads: 42
Joined: Dec 2008
City: Chicago, IL
I used reproductions from RenovatedRadios on my 60 too. They work great
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
(03-23-2012, 09:00 PM)bandersen Wrote: I used reproductions from RenovatedRadios on my 60 too. They work great ![Icon_smile Icon_smile](https://philcoradio.com/phorum/images/smilies/icon_smile.gif)
Thanks, bandersen,
It's always reassuring to hear from someone who has first hand experience.
lyle
I may not be very good, but I'm slow.
Posts: 45
Threads: 10
Joined: Dec 2007
City: Santa Barbara, CA
Hello Lyle:
I recall that my Model 60 (late version) uses four grommets for the tuner. RenovatedRadio sells them in sets of three. You may wish to check your radio to ensure that you receive enough grommets for the complete job.
Good luck!
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
(03-24-2012, 04:29 PM)Allen in SB Wrote: Hello Lyle:
I recall that my Model 60 (late version) uses four grommets for the tuner. RenovatedRadio sells them in sets of three. You may wish to check your radio to ensure that you receive enough grommets for the complete job.
Good luck!
Thanks for thinking of me, Allen.
I double checked and my 60 has only three grommets. Glad you mentioned it. Better safe than sorry.
Thanks again,
lyle
I may not be very good, but I'm slow.
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
Hello everyone,
Got the Philco 60 up and running, loud and clear, and now just need to take care of a few details. Do have one issue and it is still the tuning capacitor grommets. Advised to order GSm-tuner grommets from renovatedradios.com, but these will leave about a quarter inch or more of slack, because they are too thin for the screw sleeves. Probably should have taken the advice to get a bagful of assorted grommets from Harbor Freight or Lowe's. The originals were so mashed out of shape I couldn't measure them. I now realize I should have measured the sleeves. I think that's called delayed intelligence.
Do you Philco 60 guys have any thoughts about the GSm-Tuner grommets?
lyle
I may not be very good, but I'm slow.
(This post was last modified: 03-30-2012, 06:00 PM by lyle.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
If the grommets are the wrong size, you should let Ed at Renovated Radios know about it. He's one of the good guys and cares about his products...and his items are top-notch.
--
Ron Ramirez
Ferdinand IN
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
Thanks for taking the time to answer, Ron.
I agree about the quality of his product. Fair is fair, he sent me exactly what I asked for, and promptly. It's my fault. Educations are expensive, whether poker or college. I can make these work.
Thanks, again.
lyle
I may not be very good, but I'm slow.
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
(03-31-2012, 11:15 AM)lyle Wrote: Thanks for taking the time to answer, Ron.
I agree about the quality of his product. Fair is fair, he sent me exactly what I asked for, and promptly. It's my fault. Educations are expensive, whether poker or college. I can make these work.
Thanks, again.
lyle
Reckon this about rubbers, one size don't fit all.
Posts: 46
Threads: 9
Joined: Feb 2012
City: Oregon
Roger that. LOL
lyle
I may not be very good, but I'm slow.
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Cannot Adjust an IF Transformer’s cores
|
Outstanding work indeed. I wish I could come up with solutions like this.slford310 — 11:16 PM |
Cannot Adjust an IF Transformer’s cores
|
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM |
PT-6 antenna connections
|
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM |
Cannot Adjust an IF Transformer’s cores
|
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM |
PT-6 antenna connections
|
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4.
Yes, pin 6 of the 7C6 is...RodB — 07:34 PM |
bridkarl
|
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM |
Cannot Adjust an IF Transformer’s cores
|
Joseph, now you are an engineer!!RodB — 06:37 PM |
PT-6 antenna connections
|
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM |
Cannot Adjust an IF Transformer’s cores
|
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM |
PT-6 antenna connections
|
I seem to have lost my way on this PT-6.
I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM |
Who's Online
|
There are currently 3968 online users. [Complete List] » 1 Member(s) | 3967 Guest(s)
|
|
|
![>](https://philcoradio.com/phorum/images/bootbb/asb/right_arrow.png)
|