Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 42 345T
#1

Greetings all:

I have a Philco 42 345T, it is a fine set. On the rear of the chassis there is a 3 pin jack, 2 pins side to side one pin above the two, it is oval in shape and is brown bakelite. Can any of you folks tell me what it was for? Is it something I could use to connect an outside source to the set? Can a suitable adapter still be found for this jack?Icon_confused:

Any information is much appreciated.


Paul

Tubetalk1
#2

I believe that is probably the external antenna jack. These two pages will explain everything:

http://philcoradio.com/phorum/showthread.php?tid=1472

http://www.philcoradio.com/phorum/showth...p?tid=2599

--
Ron Ramirez
Ferdinand IN
#3

(04-01-2012, 11:39 AM)Ron Ramirez Wrote:  I believe that is probably the external antenna jack. These two pages will explain everything:

http://philcoradio.com/phorum/showthread.php?tid=1472

http://www.philcoradio.com/phorum/showth...p?tid=2599

Thanks Ron:

Very interesting, this set is very sensitive and pulls in a lot of stations as is. I can imagine what I could get with a good longwire. The internal antenna looks like copper plumbing, pretty unique. I have only seen this style internal in Philco's.

Thanks much.

Paul

Tubetalk1
#4

I used to have one of those and was the first set I ever got back to playing condition by replacing the filter cap. That was back in '71. Very nice radio.

Mike
#5

(04-02-2012, 07:40 PM)Mikhail7 Wrote:  I used to have one of those and was the first set I ever got back to playing condition by replacing the filter cap. That was back in '71. Very nice radio.

Mike

I have picked up WNYC from New York at nite (1000 watts) in Boston on this set, very nice. That is with no external antenna.

Paul

Tubetalk1
#6

Hi Paul,

The more I encounter Philco radios the more respect and admiration I have for them. Their rock solid dependability becomes more apparent the more I study, work with and witness testimonial to their quality. My Dad picked a winner with that old console that started my interest in the first place. I wish I still had that '345 I used to have.

Mike




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 91 Speaker Replacement
The spider is glued on the cone and so is the voice coil. I think you can use a cotton swab dipped in acetone and carefu...RodB — 02:42 PM
Restoring Philco 37-604C
Yes I saw that. If I knew, I'd probably try to arrange for getting it myself. But I have just got one. Which does not m...morzh — 01:44 PM
Philco 38-2 Automatic Tuning
When you push the lever, you are supposed to rotate the disk to the desired station. Then the magnetic tuning will acqu...morzh — 01:42 PM
Philco 38-2 Automatic Tuning
I figure out the muting from another picture that helped. Now I need to know how the automatic tuning works. When I push...dconant — 12:11 PM
Philco 91 Speaker Replacement
How would I go about removing the spider from the cone?dconant — 12:04 PM
Philco 38-2 Automatic Tuning
Hello, I am having trouble getting my automatic tuning to stay unmuted. If I play with the tuning handle I can get it to...dconant — 10:51 AM
Does anyone make photofinish replacements?
Here’s the link to the DIY photofinish section of our site: klondike98 — 09:46 AM
Delco car radio Peko vibrator converstion issues
Hi Richard, Thx for posting the schematic.  As I remember as a kid, these were great performers for the time, likely...MrFixr55 — 08:56 AM
Delco car radio Peko vibrator converstion issues
hello mr Fixr, The Electro  Powersupply that I am powering the radio with has a huge choke plus a 10,000ufd electrolyti...radiorich — 10:58 PM
Delco car radio Peko vibrator converstion issues
How about putting a choke in the power supply? The big cap was likely an attempt to stabilize the DC. Kids who cre...MrFixr55 — 09:19 PM

[-]
Who's Online
There are currently 2831 online users. [Complete List]
» 1 Member(s) | 2830 Guest(s)
Avatar

>