1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Threaded Mode
37-116 odd problem, even odder fix.
LASJayhawk
Senior Member
****
Posts: 289
Threads: 40
Joined: Oct 2011
City: Las Vegas, NV
#1

04-07-2012, 12:03 AM
This thing would not stay aligned. Would align it and 790 would be dead on a few days later it was at 840, next day 870 and jumped to 910 while I was listening to it. WWV(H) went from 15 to 15.4. Icon_eek

Tried to realign it several times but it would jump again.

Was about ready to take the RF subchassis out. Thought I would try measuring the LO at the grid cap of the mixer (6L7G) LO freq looked ok Icon_crazy so why wont it work??? Woops now 790 is at 730!!

So I replaced the wire from the tuning gang to the grid of the 6L7G and realigned it and its stable and dead on on all bands. Seems the solder joint was bad on the grid cap connector, and the LO didn't like the changing load.

6' of wire for an antenna and I was listening to the voice of Russia on 15.425 (great classical music) and at dusk I was getting WWV and WWVH at the same time on 5 and 15 MHz. Wonder what this would do with a proper antenna?
John
Las Vegas, NV USA
Find
« Next Oldest | Next Newest »




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Cannot Adjust an IF Transformer’s cores
The abilities of our 'Phorum Pholks" never ceases to amaze me! Fantastic fabrication, Joseph! I'm waiting now for...GarySP — 08:27 PM
PT-6 antenna connections
Thanks. I never realized that was a notch noted in the schematic as described. I’ll recheck my wiring.bridkarl — 08:13 PM
Cannot Adjust an IF Transformer’s cores
Thank you! I was quite new to the Phorum when I started this post, so I feel like it might be advantageous to publish a ...jrblasde — 08:07 PM
PT-6 antenna connections
Notice in the schematic the notch at the bottom of the antenna coil is between pins 3 & 4. Yes, pin 6 of the 7C6 is...RodB — 07:34 PM
bridkarl
I have two PT-6 chassis. On both there is a blue wire that runs from the above chassis transformer to pin 6 of 7C6. So t...bridkarl — 07:23 PM
Cannot Adjust an IF Transformer’s cores
Joseph, now you are an engineer!!RodB — 06:37 PM
PT-6 antenna connections
Hi, reading your explanation I can see the confusion. If you take it one connection at a time it should result in a desi...RodB — 06:34 PM
Cannot Adjust an IF Transformer’s cores
It works! I received the PCBs this morning in the mail, and put everything together. I reused the base from the original...jrblasde — 04:32 PM
PT-6 antenna connections
I seem to have lost my way on this PT-6. I see the antenna aerial transformer schematic - I’m reading pins 1 through ...bridkarl — 12:30 PM
40-150 General questions
Good thing you're a good electrician ... the pictures show a lot of rewiring in your future! Take care and BE HEALTHY!...GarySP — 11:52 AM

[-]
Who's Online
There are currently no members online.

>
  1. The PHILCO Phorum
  2. Philco Radio Discussions
  3. Philco Electronic Restoration