Proud new owner of a 37-690
Posts: 811
Threads: 43
Joined: Dec 2008
City: Chicago, IL
Over the past few years I've seen a few lucky collectors pick up this amazing set - never thought I'd be one of them though.
A little background first. I work from home as a programmer. Mostly developing websites and smart phone apps. Well, a couple weeks ago I found myself committed to a full week of online remote training via skype. So I was pretty much chained to my desk 8 hrs a day. However, while I could see them, they couldn't see what I was doing so I couldn't resist poking around on craigslist. Imagine my surprise when I saw a 37-690 for sale just a few miles away! Just one problem - I can't go get it 
I put the mic on mute and made a quick call to another local collector and good friend. Turns out he has the day off but is elbow deep swapping parts between a couple vintage Coronados with his brother. I finally convinced (bribed) them to drop what they were doing and go get it - if it was even still available. Hours went by and finally I got a call back. They were waiting outside with the radio  I thought they'd use their pickup, but it was out of commission so they had to use an old caddy. They had carefully wrapped it in a blanket and it actually sort fit in the trunk.
Even more amazing, my buddy, whose pretty good at negotiating, got it for half the asking price 
They helped me carry it up two flights of stairs to my back porch and here it finally is!
The finish on the outside is flaking off at the slightest touch, but the veneer is very sound as are all the joints.
[Image: http://farm8.staticflickr.com/7060/70788...9400_z.jpg]
The insides look like no one has messed with anything 
[Image: http://farm6.staticflickr.com/5192/69327...7fcf_z.jpg] [Image: http://farm6.staticflickr.com/5442/69327...9388_z.jpg]
[Image: http://farm8.staticflickr.com/7236/69327...403a_z.jpg] [Image: http://farm8.staticflickr.com/7230/69327...7ac4_z.jpg]
(This post was last modified: 11-24-2014, 03:34 PM by Bob Andersen.)
Posts: 289
Threads: 40
Joined: Oct 2011
City: Las Vegas, NV
OK make us all sick, How much?
John
Las Vegas, NV USA
Posts: 811
Threads: 43
Joined: Dec 2008
City: Chicago, IL
I knew someone was gonna ask. Are you really, really sure you want to know ?
Posts: 4,890
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
Well one thing I do know, regardless of what it cost it will be restored to a much higher standard then a 38-690 belonging to another collector on the other forum.
Regards
Arran
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Man, that is fantastic!!! Great job getting your 37-690 !!!
It looks to be in good, un-molested shape! I will second the belief that you will make it a showpiece!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Reckon it might be a candidate for an application of a resto-finish product?
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Wow, nice find!
(This post was last modified: 09-18-2012, 12:01 PM by Michael Dennis.)
Posts: 811
Threads: 43
Joined: Dec 2008
City: Chicago, IL
Thanks guys. I feel kinda sad in a way because the only good spot to put it is where my prized 15DX has resided for the last few years. So for now, it's in a corner of the kitchen. Hopefully, I'll move to a bigger place before long and can display these sets more appropriately.
As for the finish, the top was so bad I wanted to protect it ASAP. I was able to just use a scrapper and take all the old finish off very easily. Only downside was the little flakes of old lacquer went everywhere - especially into my hair!
[Image: http://farm8.staticflickr.com/7271/71202...1ff9_z.jpg] [Image: http://farm9.staticflickr.com/8157/71202...207e_z.jpg]
That revealed some real purdy veneer I can't wait to see what the doors have in store. I recall my friend said the previous owner made of point of highlighting the patterns hidden in the doors.
[Image: http://farm8.staticflickr.com/7255/69741...9218_z.jpg]
I'll just slap on some lacquer for protection for now. Eventually, I'll tackle the rest of the cabinet.
(This post was last modified: 04-27-2012, 11:24 PM by Bob Andersen.)
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
(04-27-2012, 10:02 PM)bandersen Wrote: I knew someone was gonna ask. Are you really, really sure you want to know ?
Ok Bob spill it. how much did you get it for? I'm really curious cause they usually go for around 1-2k online. If you don't want to post it you can PM it. 
Posts: 4,890
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(04-28-2012, 12:25 AM)ipwizard Wrote: (04-27-2012, 10:02 PM)bandersen Wrote: I knew someone was gonna ask. Are you really, really sure you want to know ?
Ok Bob spill it. how much did you get it for? I'm really curious cause they usually go for around 1-2k online. If you don't want to post it you can PM it.
Actually they don't unless they are restored or in really good original shape surprisingly, I don't think I've heard of anyone paying $2000 for one. The last time I remember someone buying one on fleabay it was a 38-690, the finish was about average, and I think they had about $850 into total after they had it shipped West from the East coast. Everyone else I know of bought one through a private sale either regionally or locally.
Regards
Arran
Posts: 4,890
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
(04-27-2012, 11:18 PM)bandersen Wrote: Thanks guys. I feel kinda sad in a way because the only good spot to put it is where my prized 15DX has resided for the last few years. So for now, it's in a corner of the kitchen. Hopefully, I'll move to a bigger place before long and can display these sets more appropriately.
As for the finish, the top was so bad I wanted to protect it ASAP. I was able to just use a scrapper and take all the old finish off very easily. Only downside was the little flakes of old lacquer went everywhere - especially into my hair!
[Image: http://farm8.staticflickr.com/7271/71202...1ff9_z.jpg] [Image: http://farm9.staticflickr.com/8157/71202...207e_z.jpg]
That revealed some real purdy veneer I can't wait to see what the doors have in store. I recall my friend said the previous owner made of point of highlighting the patterns hidden in the doors.
[Image: http://farm8.staticflickr.com/7255/69741...9218_z.jpg]
I'll just slap on some lacquer for protection for now. Eventually, I'll tackle the rest of the cabinet.
It looks like that cabinet spent time in the same sort of environment as the Brunswick and the 1930 G.E console. I wonder if it's moist air or the temperature that causes the finish to flake off?
Regards
Arran
Posts: 811
Threads: 43
Joined: Dec 2008
City: Chicago, IL
(04-28-2012, 12:25 AM)ipwizard Wrote: Ok Bob spill it. how much did you get it for? I'm really curious cause they usually go for around 1-2k online. If you don't want to post it you can PM it.
That's what I figured. This one seems to have sold for $1,275 very recently. http://antiqueradios.com/forums/viewtopi...1&t=186877
And this for $,1000: http://www.antiqueradios.com/forums/view...1&t=190740
PM sent.
Posts: 811
Threads: 43
Joined: Dec 2008
City: Chicago, IL
(04-28-2012, 12:39 AM)Arran Wrote: It looks like that cabinet spent time in the same sort of environment as the Brunswick and the 1930 G.E console. I wonder if it's moist air or the temperature that causes the finish to flake off?
Regards
Arran
Good question. My Brunswick definitely spent time in a humid environment as evidenced by the rust and veneer separation. This set however has little if any rust and no veneer damage. It's my understanding it did spend a lot of time out in the garage though so I suspect it's a victim of the big temperature variations we experience in the Midwest.
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Hi Bob
That is a nice radio, glad you got it. Put it on YouTube as you restore it, I enjoy your shows on YouTube.  congrats. Joe
Joe Bratcher near Louisville, KY
Posts: 2,035
Threads: 367
Joined: Jun 2010
City: Dover, OH
Very nice find. Just shows that the Philcos are still out there and even the top of the line models are still being found in the 'wild'.
No matter where you go, there you are.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Testin a speaker and output transformer Trutone A2-G
|
| Hey Murf, this shouldn't be too difficult if it happens all the time. I'm assuming this is the 1938 Wells Gardner A2 wit...RodB — 05:46 PM |
|
Testing a speaker and output transformer Trutone A2-G
|
| Hello guy's,
Have a Trutone A2-G teledial floor model radio that I am having issues with.
Suspecting maybe speaker or ...murf — 03:25 PM |
|
Testin a speaker and output transformer Trutone A2-G
|
| Hello guy's,
Have a Trutone A2-G teledial floor model radio that I am having issues with.
Suspecting maybe speaker or ...murf — 03:24 PM |
|
Philco model 38 code 121 not receiving signal.
|
| Save the money on the Kapton tape. Just cut an insulator to size out of a clear plastic blister pack and attach it arou...GarySP — 01:13 PM |
|
Philco model 38 code 121 not receiving signal.
|
| The thing is when I touch or probe the antenna terminal, the volume control input, the wiper (output), and the primary t...Stormlord5500 — 12:53 PM |
|
Two small radios from France. Restoration and review.
|
| Hello, Vlad. I agree with your description of French radios. I might add that they are made like French cars – extravaga...RadioSvit — 11:08 AM |
|
Philco model 38 code 121 not receiving signal.
|
| I do thank you all for helping me out on this.Stormlord5500 — 08:01 AM |
|
Philco model 38 code 121 not receiving signal.
|
| It does oscillate. Here's the deal. If I touch a probe or my finger to anything in the secondary circuit of the antenna ...Stormlord5500 — 08:00 AM |
|
The list of my radio & TV collection!
|
| Hello Arran,
Some great info so you are talking about silver migration then that seems to really play issues with these...radiorich — 02:43 AM |
|
Philco model 38 code 121 not receiving signal.
|
| Hi Stormlord and welcome to the Phorum.
I am scratching my head because, even if the primary of the antenna coil is b...MrFixr55 — 01:56 AM |
|
Who's Online
|
There are currently 2238 online users. [Complete List]
» 1 Member(s) | 2237 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
