Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 89 Filter Cap Can Dimensions?
#1

I'm trying to make this Philco model 89 as original as possible. I'd like to know if anyone can tell me the length and diameter of the original filter cap cans that mounted on the chassis via a strap assembly. I've looked around and can't find any original cans but if I can get the dimensions I can try to find two cans that will work. Preferably two matching cans.

If someone can give me these dimensions I sure would appreciate it.

Thanks much,
Pepper

"It's Nice To Be Nice To The Nice"
Major Frank Burns Mash 4077th
#2

Do you have the Phico part number? If so, I could see if it is the same as my 18 while I have it apart.
#3

I don't have the originals of course but the part number on my paperwork calls them out as #44 & #46. Part numbers 8165 and 8166 respectively. My paperwork is for models 89 & 19 but if the model 18 is similar those will do.

Pepper

"It's Nice To Be Nice To The Nice"
Major Frank Burns Mash 4077th
#4

Large 4" tall, Small 3-1/4" tall, both are 1-3/8" across. Remember that both have cardboard insulators between cap and mount. but since they dont mount flush to the top of chassis you could use taller caps and just mount them deeper into the clamp.
#5

Thanks tab! Now I go looking for a couple of cans.

Pepper

"It's Nice To Be Nice To The Nice"
Major Frank Burns Mash 4077th




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Made mistake & did not label connection
Excellent information. It is all starting to come together now and your explanation really helped since I noticed that ...georgetownjohn — 04:39 PM
Made mistake & did not label connection
Hi John, I don't have this radio, but I can supply some info: Based on your pic, pins 7,8 and 1 are used together, go...MrFixr55 — 02:02 PM
New Philco Repair Bench
As far as I know, the Repairbench does not work, and has not been working in a while. Chuck (we had that campaign looki...morzh — 01:33 PM
Radio city products 664 schematic request
Need a schematic or manual for the 664. The 663 may be similar.daveone23 — 12:38 PM
New Philco Repair Bench
Thanks Gary.dconant — 12:16 PM
New Philco Repair Bench
I tried accessing the site through our library and got the same response. It's reported to our tech gurus. GaryGarySP — 11:50 AM
New Philco Repair Bench
I am sure this is the archive, and not the Chuck's site.morzh — 09:50 PM
Made mistake & did not label connection
It's not like we are good friends with that wire and can tell it from other ptetty identical looking wires. Why'n't you...morzh — 09:49 PM
Made mistake & did not label connection
I'm not sure why that wire wasn't covered in the video. I'm pretty sure the 6A8 won't work until that pin is grounded. Y...RodB — 09:47 PM
Made mistake & did not label connection
You'll have to forgive me, I am not sure what you mean.  Can you explain what you are really saying.  If anyone does not...georgetownjohn — 08:05 PM

[-]
Who's Online
There are currently 2647 online users. [Complete List]
» 1 Member(s) | 2646 Guest(s)
Avatar

>