Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Dial Philco 66S and dial philco 66B
#1

hello i have two tombstone philco, but they have diferent dial, the Philco 66s have the scale dial number 27-5081 and the philco 66b have the dial 27-5057, some have this radio ????

are originall this dial of ths two radio ??????????????

thank you, Mauricio
#2

Hi Mauricio,

The information I have access to says the dial for the Philco 66B is indeed part number 27-5057. This is a tombstone radio with the small window for the dial - is that correct? (Philco also made a cathedral radio with this model number). Here's a picture of the 66B from Ron's website.

http://www.philcoradio.com/gallery/1935a.htm#ae

The 66S has a much more ornate grill than the 66B, but I don't have any other specific info on it. I'm sure there is someone here that has access to better info than I do. Here's a picture of the 66S from Ron's website.

http://www.philcoradio.com/gallery/1935c.htm#n

It is possible that your 66S has the correct dial with part number 27-5081, but I'm not able to verify it.

Those are both very nice radios!

Bill

Sent from my Pentium II on the AT&T Dial Network
#3

thank you, Bill, yes the dial of radio 66b is 27-5057, of this i m segure, but i can not find infromation of dial 66-s.

i have this radio, the radio 66-s is small and more nice for me.

thank you, mauricio




Users browsing this thread:
[-]
Recent Posts
Philco 610B oscillator wiring
I don't know what you are referring to when you say "tube cathode ground". Ground is a connection to the chass...RodB — 05:56 PM
Zenith H725
Good points, Arran. I haven't encountered this problem with any other radio (all earlier vintages), so am learning here....EdHolland — 05:32 PM
Zenith H725
Ed; One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM
Philco 610B oscillator wiring
Do you know what run # your chassis is? It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM
Need to purchase some accessories for restoration of my Old Philco Radio
COLLEAGUES, Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM

[-]
Who's Online
There are currently no members online.

>