Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I couldn't pass up this E.H. Scott Allwave 23 Tasman cabinet...
[Image: http://www.philcoradio.com/images/phorum..._00001.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00002.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00004.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00005.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00003.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00006.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00007.jpg]
I had considered fixing this up and reselling it. Then, someone expressed an interest in acquiring it from me. I haven't heard any more from the fellow, so I think I'll keep it
I've already been looking around, to see what I could get rid of to make room for it so that it may stay here. (These days, it's to the point that when one console comes in, another pretty much has to go.) Don't be surprised if I put one of my Philco chairsides with separate speaker up for sale soon.
The next logical step will be to find a 7-knob Allwave 23 tuner chassis, amp/power supply, speaker and dial escutcheon...oh, and the cabinet will require refinishing. At least the lower part will. The lid is still in pretty decent shape other than some scratches on top.
--
Ron Ramirez
Ferdinand IN
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
I kind of like it as it is. I say fix it and listen to it, and then donate it later on.
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Posts: 594
Threads: 41
Joined: Aug 2010
City: Shepherdsville, KY
Envy
That is a good looking cabinet. I used to have a tuner and amp that went with that cabinet and a woofer with two tweeters and the crome was perfect, but I let it get away. That was before I got interested in old radios. . By the way I like that little arvin in the uppper right in the picture that was what I used the listen to the Lone Ranger and others in late 40's I have one also. Good luck on the cabinet and finding a chassis for it .
Joe
Joe Bratcher near Louisville, KY
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Very nice find!! That will be a fun project to put right and an outstanding set to listen to!!!!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Oh, wow, Joe, I wish you still had the Allwave 23 tuner, amp and speakers...oh well! I'll find a suitable tuner and amp eventually.
The Arvin belongs to Debbie. She now collects Arvin bakelite and plastic sets.
--
Ron Ramirez
Ferdinand IN
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
Nice!! I know you'll find the tuner and speakers. Seems like finding the cabinet is the hard part, especially one in that good of condition.
Glenn
Happily back in Illinois..not.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Just over a month later and I've come up with the tuner...with a complete set of knobs!
[Image: http://www.philcoradio.com/images/phorum..._00001.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00002.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00003.jpg]
[Image: http://www.philcoradio.com/images/phorum..._00004.jpg]
Granted, the chrome is not in the best of shape. Rough in some areas, bubbling in others, rusty in other spots. But the tuner is complete. And the complete set of knobs is an extra added bonus.
The lacquer on the knobs is in poor shape, and they will all need to be relacquered.
This is an eBay find. I was outbid on the amp. The set was advertised as "working" before it was parted out. I'll go through it anyway...eventually...but I'll restore the McMurdo first.
Oh, and I now have an escutcheon for the dial, also, along with the "Y" cable for the tweeters, just in case I ever get lucky enough to find them.
--
Ron Ramirez
Ferdinand IN
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
Very nice, the chrome is in more or less the same condition as my AW 12 amp and radio chassis'. Mine may be in a little better condition. I'm watching an AW 12 on Ebay now, there are separate auctions for the amp chassis and the radio chassis, which is a two-dialer, mine being a single dial model which I'll probably list on Ebay mext week. This Ebay seller doesn't have a speaker to go with the radio and amp. I have a 12" pedestal speaker that came with the Scott I have.
Mike
(This post was last modified: 09-18-2012, 11:43 AM by Michael Dennis.)
Posts: 3,135
Threads: 54
Joined: Apr 2011
City: Lexington, KY
Even the Scott's with bad chrome can be polished up to look fairly respectable and are still pretty impressive looking. That is a good snag to get it with all the knobs. When they parted out that Scott I'm surprised the knobs didn't get listed separately.
Ron's Christmas list:
Chrome Polish X-LG bottle
Large pack of ulta-plush micro-fiber cloths for polishing
Epson Salts to soak sore fingers
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
Posts: 717
Threads: 30
Joined: Feb 2008
City: Grand Rapids, MI
It's good to know the chrome can be more or less reclaimed to a certain extent.
Mike
(This post was last modified: 09-18-2012, 11:45 AM by Michael Dennis.)
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
Ooh that's gotta hurt and do wear nitrile gloves. Ya know kneeding pizza dough and/or a few loaves of bread helps some with an Alieve pill, if you're allowed.
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Good find!!! Might be worth it to have the parts re-chromed for this rare set!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
The tuner is now in the cabinet. Quick and dirty picture:
[Image: http://www.philcoradio.com/images/phorum..._00001.jpg]
The cabinet looks better with an escutcheon, doesn't it?
--
Ron Ramirez
Ferdinand IN
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Stupid Scott flash chrome, why such a high end brand went so cheap on chrome plating I'm never know. Wells Gardener seems to have been able to plate their chassis properly and their business was making department store brands. The plating on this example is even worse then normal, I don't think that any amount of polishing will make it look respectable unfortunately. The knobs on that Scott look the spitting image of the ones on my FADA model 1001 post war AC/DC set, even down to the boxwood rings on the face, maybe Scott bought them off the shelf?
Regards
Arran
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 46-420 Code 121 Reception issues
|
Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
Philco 46-420 Code 121 Reception issues
|
You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
Philco 42-1008 conversion kit
|
Interesting. I haven't seen that before.klondike98 — 07:02 PM |
12' Philco
|
Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
Shadow Meter Bulb
|
Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
Shadow Meter Bulb
|
Ok. Thanks for the correction.RossH — 03:09 PM |
Model 28L
|
For 28 you will probably need to buy a Hammond 125CSE. Or any of the series of the power you need, with SE suffix. Then ...morzh — 02:09 PM |
37-60 revision 6
|
I am restoring a Philco 37-60 and it shows run 6 they removed the ground from G3 of the 6K7G and put the G3 to -2.5v for...bobbyd1200 — 01:01 PM |
Shadow Meter Bulb
|
Mike is correct on the bulb connection, two separate circuits. I found that by rotating the bulb and sliding it forward ...RodB — 12:19 PM |
Hickok AC51 tube tester
|
Cleaned ann contacts, switches and sockets, works great now.martinj — 11:32 AM |
Who's Online
|
There are currently 3581 online users. [Complete List] » 1 Member(s) | 3580 Guest(s)
|
|
|
|