Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Model 19 Cathedral Shadow Meter
#1

Hi all,

Would any of you know if the shadow meter that is standard on a Model 19 cathedral chassis is the same as let's say other models? I've some other chassis that contain shadow meters, and the chassis I am dealing with it now has provisions for a meter, BUT the meter is missing.

Thanks for your advice and assistance.

73 de,

Gary/N9VU
#2

Gary,

Philco designed three versions that I know of (see my Service Tips on S. Meters). I believe the type you are looking for would be the early version with the long rectangular box. The Service Tip will give you other models of that early period that would have used the same type you could scavenge or look for junkers.
#3

Chuck Schwark Wrote:Gary,

Philco designed three versions that I know of (see my Service Tips on S. Meters). I believe the type you are looking for would be the early version with the long rectangular box. The Service Tip will give you other models of that early period that would have used the same type you could scavenge or look for junkers.

I'll give the site a look. Thanks Chuck.

73 de,

Gary/N9VU




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Rusty Tuning Condenser
Give the tuner a good wash in Dawn and hot water. Then set tuner in a plastic container and cover with vinegar let soak ...David — 12:53 PM
Rusty Tuning Condenser
If you have rust between the vanes, I wonder how you get the NJ in between, and how you then wipe it off.morzh — 12:02 PM
Philco 60 Squealing
If the noise is still there, the OPT might just be OK. Or so we hope.morzh — 12:01 PM
Philco 60 Squealing
You would probably be replacing the OPT.RodB — 10:54 AM
Philco 60 Squealing
I have been playing the radio for a while now and doing well. Turned it on today and all I got was a whole lot of noise....dconant — 09:39 AM
Rusty Tuning Condenser
Thanks guys. I think I'll give the Naval Jelly a try since I can better control where it goes.dconant — 09:23 AM
Philco Model 80 Transformer resistance
Just forget this number, it is useless anyway. Simply proceed with your project.morzh — 10:08 PM
Philco Model 80 Transformer resistance
My $0.02 is that it is a misprint. I tried to look up the value for the similar 84 and 37-84, and ther is no resistance...MrFixr55 — 09:51 PM
Philco Model 80 Transformer resistance
Thanks for the quick reply! Hmm...well that's good, so what am I seeing that's 1042 ohms on the schematic for the pow...Mike L — 08:46 PM
Philco Model 80 Transformer resistance
The DC resistance of the primary is 8 to 9 Ohm.morzh — 07:54 PM

[-]
Who's Online
There are currently 2920 online users. [Complete List]
» 1 Member(s) | 2919 Guest(s)
Avatar

>