Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Dial Pointer & String Philco 40-150
#1

HI! I've got this 40-150 that is missing these parts! No dial string and most important no pointer can any one out there in Philco Land HELP the big wheel that the string goes around will tune the stations if I turn it by hand also the push buttons work ok The pointer is long as it covers 3 bands Thanks in advance guys I hope you can help?
#2

Just wondering if you ever found the part you were looking for. I just picked up a 40-150 my self with the exact same problem. I also need the indicator or pointer as well as a diagram for restringing. Thanks for your reply. Bob

Robert Chesarek
Renfrew, PA
#3

Hello Bob. If memory serves me I got the dial pointer from " PLAY THINGS OF PAST" http://www.oldradioparts.com Gary has a treasure trove of rare stuff. By checking back at his web sight periodically he had one for sale. In a pinch sometimes you can use a paper clip if the slider is there. There is a web sight that shows dial stringing, but I don't recall it's address maybe one of the other members can help with that. GOOD LUCK DAN. Icon_wink
#4

Hello Again; I forgot to add, This is a GREAT sounding radio; I have a 40-190 & two 40-150's & a 40-155. I like to see those wine colored buttons lit up. The slant fronts sound as good as the art deco 40-190 console. DAN 8)
#5

Hey Dan, thanks for the reply. Yes, I am missing the slider also. Any chance you would have a close up pic of the part so I know exactly what I am looking for? If not don't sweat it, there is a lot of work to do yet. I am looking forward to hearing the restored chassis as you and others have said they sound great! Thanks again, Bob

Robert Chesarek
Renfrew, PA
#6

The dial stringing for the 40-150 is the same as your other 40-150 and 40-155 that you mention, btw.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 42-390, code 121 speaker
>>A closer examination of the very small print schematic indicates that the speaker is a PM type. This shows a ...morzh — 05:18 PM
Philco 60 Squealing
Litz is typically tinned by simply rubbing it with the soldering iron tip while immersed in solder (and a bit of rosin f...morzh — 05:14 PM
Philco 6K7
The suppressor grid (if by G3 you mean the S) is usually at the Cathode potential, which in this caes is GND. I am not ...morzh — 05:10 PM
Philco 16B Parts
Thanks for the reply. Unfortunately the radio was removed before bidding was over so I didn't get a chance to bid.dconant — 04:10 PM
Philco 16B Parts
Hi Dan, Mike is correct, there's a lot of painted stuff on the chassis but it looks pretty good. The sm is all there,sp...Radioroslyn — 03:50 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A...captainclock1988 — 03:43 PM
Philco 42-390, code 121 speaker
Using a 5W  1.5k  ceramic resistor in place of the field coil and using a 4 ohm PM speaker, I was able to bring the radi...Stevelog — 02:57 PM
Philco 60 Squealing
I have taken out the 2nd IF and found a problem or not. I believe the coils are litz wire. There is a very small strand ...dconant — 02:13 PM
Philco 6K7
I am restoring a Philco 37-60. The am reception is very good, but the shortwave is very weak. Run 6 Philco removes the g...bobbyd1200 — 01:35 PM
1930s Stromberg-Carlson Tombstone Radio need help identifying model number
Hi Cap'n Clock, Unfortunately, I do not have this radio.  This is a shame because this should be a good performer.  2A5...MrFixr55 — 06:48 AM

[-]
Who's Online
There are currently 5307 online users. [Complete List]
» 4 Member(s) | 5303 Guest(s)
AvatarAvatarAvatarAvatar

>