I am looking for a Zenith...maybe....with the tuning eye
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
I told my father (who's 77) I may pick a radio, fix it and give it to him, and he said he'd like one but it has to be with a tuning eye, for nostalgic reasons.
So I think I'll be looking for a tombstone-size or similar (read - not a floor type) Z-brand radio with the cabinet that does not need lots of work (I ain't good at it) and the chassis, as long as it is not thoroughly rusty or mangled, will do.
If anyone's aware of something, please let me know.
Mike.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
I dunno about a Zenith with those qualifications.. Other than the Walton sets I can only find a couple of that brand tabletop with the tuning eye. A 9S324, a 10S443 (Ugly 1940 set) and a 7S323 (same cabinet as the 9S324.)
I'm far from an expert, but have you considered a nice RCA? Lots of tuning eye models to choose from and you don't have to pay the "Brand Z Tax" tm.
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
Whatever looks good and has short waves. And the tuning eye.
Waltons...too expensive.
RCA would do, but hadn't seen lots of those either on ebay.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Where are you located at? I found mine on craigslist (RCA 9T) and my consoles through am auction. I recall seeing a 6T on craigslist recently... Anyone else have any thoughts?
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The RCA would be a cheaper alternative. Assume you want a tombstone or cathedral set?
Some '36 and later Silvertones also had tuning eyes and are very nice.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Good call on the Silvertone! Some real nice looking sets with the tuning eye.
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Hey if it don't have an eye just add one. Heck add two a 6E5 on one side and a 6AL7 on the other. Oh and good measure get one of those little skinny peanut jobs for the dial pointer.
Terry
Posts: 15,818
Threads: 554
Joined: Oct 2011
City: Jackson, NJ
LedHead
I'm in Jackson NJ.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Wards-airline made some cool looking sets with the tuning eye too. I'll keep my eyes open for you. If I see something that might be suitable I will PM you.
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 4,705
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
An RCA set would be a good alternative to a brand Z, and it would likely be a better performer on shortwave as well. There is also Airline, Silvertone, Stewart Warner, FADA, Grunow, Sparton, Crosley, G.E, and several others that used Magic Eye tubes.
Regards
Arran
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Mike
If i had something laying around I'd send it your way but I think the only set I have with an eye toob is the National. It's one of my favorites!
http://www.flickr.com/photos/42774321@N0...hotostream
GL on your seach!!
Terry
ps I saw this article on replacing the 6*5 tube with a 1629 (military 6E5 w/12v heater). Scroll down the eye article.
http://www.antiqueradios.org/gazette/index.html
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Price may be a bit high... I'm not really sure what the going rate is for these.
http://www.ebay.com/itm/Antique-RCA-Vict...20cd32abf8
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hmmm... nice original shape, but on the high side for a six tube RCA.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
If it wern't for that crack in the veneer on the rolled edge.
Posts: 7,285
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Ha Ha even the model # is an eye toob
Terry
Users browsing this thread: 4 Guest(s)
|
|
Recent Posts
|
|
trying to identify this wire type
|
| The red wire is rubber covered wire.
The others are cotton braid over rubber often in colors or a tracer, also strand...Chas — 02:43 PM |
|
trying to identify this wire type
|
| Greetings Phorum members,
Hope you can help me identify this type of wire in the photo I have attached. I am not sure ...georgetownjohn — 01:53 PM |
|
Philco 60 Squealing
|
| All correct shields must be in place, all tubes correct no subs of any kind.
Check any soldered, riveted ground conne...Chas — 01:24 PM |
|
Philco 60 Squealing
|
| I have recapped and replaced out of tolerance resistors and so on. Radio plays nicely on fairly strong stations. The pro...dconant — 10:55 AM |
|
Philco 46-420 Code 121 Reception issues
|
| Welcome Eric,
I agree with Bob and far as the two main electrolytic filter capacitors did you change them yourself or w...radiorich — 11:43 PM |
|
Philco 46-420 Code 121 Reception issues
|
| You mentioned the Philco manual and going through the check points...just to be sure we're on the same page here's the m...klondike98 — 08:13 PM |
|
Philco 42-1008 conversion kit
|
| Interesting. I haven't seen that before.klondike98 — 07:02 PM |
|
12' Philco
|
| Yes I had looked for it on the web as well some time back and could not find it. I was glad to see it turned up in Ron'...klondike98 — 06:59 PM |
|
Shadow Meter Bulb
|
| Now if you had a set with a tuning light then the bulb type is important to the circuit, some sets used those prior to t...Arran — 04:58 PM |
|
Shadow Meter Bulb
|
| Ok. Thanks for the correction.RossH — 03:09 PM |
|
Who's Online
|
There are currently 4083 online users. [Complete List]
» 2 Member(s) | 4081 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
