Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA Victor R-15
#1

Could someone with Riders volume 1 scan a copy of the schematic for the RCA Victor R-15 for me? I believe it is on 1-14 under RCA Victor.

The copy on Nostalgia Air is unreadable and Riders Vol 1 is one that I don't have.

Thanks

-Keith
#2

It's also a Radiola 48. The big, heavy vertical TRF chassis, right?

Those sets must have been in a contest with the Baldwin Locomotive Company for weight. However, they were reportedly very good sets.

I'm sure I have the RCA Radiola 48 service book, but just where to look is the problem.
#3

The early Victors are surprisingly GOOD receivers for TRF sets. I had an RE32 that had amazing reception. It had, if I remember correctly, FOUR RF amplifier circuits before the detector.

HOWEVER, the Victors are TOUGH to work on.
#4

Keith, I have a copy of the R-15 from Vol I that you requested. Let me know how to get it to you.It is a pretty good copy.

Dave D
#5

Ijust did a google search for: "RCA Radiola 48. It has the entire RCA service booklet with a clear full page schematic diagram, as well as the rest of the book.
#6

Thanks Dave and Doug for the info.

I hope it turns out to be a good performer. I have had it for a few years now got it from my parents for a birthday present. It's missing the dial bezel which i have been hunting for since I got it. The cabinet is in good shape except for the veneer on the top is shot and will need to be replaced. The press wood looks very good.

-Keith
#7

Keith: you might want to take a look at the radiolaguy website, he may have what you are looking for....




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco 610B oscillator wiring
I don't know what you are referring to when you say "tube cathode ground". Ground is a connection to the chass...RodB — 05:56 PM
Zenith H725
Good points, Arran. I haven't encountered this problem with any other radio (all earlier vintages), so am learning here....EdHolland — 05:32 PM
Zenith H725
Ed; One thing that I will say about these is that Brand Z was considerate enough to make these mica caps easily acces...Arran — 02:34 PM
Philco 610B oscillator wiring
Do you know what run # your chassis is? It took me a while to find what you were basing updates/modification on as I did...Radioroslyn — 07:34 AM
Need to purchase some accessories for restoration of my Old Philco Radio
COLLEAGUES, Thank you all for such good and important suggestions as how to find good replacement parts. I will go fo...palonso — 07:05 AM
Zenith H725
Here's what the inside of AM IFT2 looked like, and the other pic shows the discs I made to take place of the mica and ke...EdHolland — 07:40 PM
Zenith H725
IF2 will need replacement caps. The arcing was severe enough that the mica is pitted and holed where the HT flashed over...EdHolland — 04:04 PM
My Philco 37-116 Restore
Measuring from center tap like the tube voltages show. Cap 127 is isolated from ground. Cap 127 shown in upper left of p...dconant — 08:05 AM
My Philco 37-116 Restore
Are you measuring relative to the centertap or the GND?morzh — 11:57 PM
Philco 610B oscillator wiring
Still not clear on the wiring interface between the 6A7 and oscillator. After refering to the available schematics and s...Tubester — 07:18 PM

[-]
Who's Online
There are currently 599 online users. [Complete List]
» 1 Member(s) | 598 Guest(s)
Avatar

>