I am looking for a Zenith...maybe....with the tuning eye
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
I told my father (who's 77) I may pick a radio, fix it and give it to him, and he said he'd like one but it has to be with a tuning eye, for nostalgic reasons.
So I think I'll be looking for a tombstone-size or similar (read - not a floor type) Z-brand radio with the cabinet that does not need lots of work (I ain't good at it) and the chassis, as long as it is not thoroughly rusty or mangled, will do.
If anyone's aware of something, please let me know.
Mike.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
I dunno about a Zenith with those qualifications.. Other than the Walton sets I can only find a couple of that brand tabletop with the tuning eye. A 9S324, a 10S443 (Ugly 1940 set) and a 7S323 (same cabinet as the 9S324.)
I'm far from an expert, but have you considered a nice RCA? Lots of tuning eye models to choose from and you don't have to pay the "Brand Z Tax" tm.
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
Whatever looks good and has short waves. And the tuning eye.
Waltons...too expensive.
RCA would do, but hadn't seen lots of those either on ebay.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Where are you located at? I found mine on craigslist (RCA 9T) and my consoles through am auction. I recall seeing a 6T on craigslist recently... Anyone else have any thoughts?
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
The RCA would be a cheaper alternative. Assume you want a tombstone or cathedral set?
Some '36 and later Silvertones also had tuning eyes and are very nice.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Good call on the Silvertone! Some real nice looking sets with the tuning eye.
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Hey if it don't have an eye just add one. Heck add two a 6E5 on one side and a 6AL7 on the other. Oh and good measure get one of those little skinny peanut jobs for the dial pointer.
Terry
Posts: 16,250
Threads: 564
Joined: Oct 2011
City: Jackson
State, Province, Country: NJ
LedHead
I'm in Jackson NJ.
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Wards-airline made some cool looking sets with the tuning eye too. I'll keep my eyes open for you. If I see something that might be suitable I will PM you.
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 4,810
Threads: 54
Joined: Sep 2008
City: Sandwick, BC, CA
An RCA set would be a good alternative to a brand Z, and it would likely be a better performer on shortwave as well. There is also Airline, Silvertone, Stewart Warner, FADA, Grunow, Sparton, Crosley, G.E, and several others that used Magic Eye tubes.
Regards
Arran
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Mike
If i had something laying around I'd send it your way but I think the only set I have with an eye toob is the National. It's one of my favorites!
http://www.flickr.com/photos/42774321@N0...hotostream
GL on your seach!!
Terry
ps I saw this article on replacing the 6*5 tube with a 1629 (military 6E5 w/12v heater). Scroll down the eye article.
http://www.antiqueradios.org/gazette/index.html
Posts: 83
Threads: 14
Joined: Jan 2012
City: Mount Vernon, WA
Price may be a bit high... I'm not really sure what the going rate is for these.
http://www.ebay.com/itm/Antique-RCA-Vict...20cd32abf8
One cannot forbid people to be idiots....all one can do is try not to be one. -Morzh
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hmmm... nice original shape, but on the high side for a six tube RCA.
Posts: 2,118
Threads: 112
Joined: Jun 2010
City: Medford OR (OR what?)
If it wern't for that crack in the veneer on the rolled edge.
Posts: 7,294
Threads: 268
Joined: Dec 2009
City: Roslyn Pa
Ha Ha even the model # is an eye toob
Terry
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Philco 91 Restore Code ??
|
| I knew that Fluke was the Cadillac so with that in mind what Fluke would you recommend I get?dconant — 03:53 PM |
|
Philco 91 Restore Code ??
|
| Yep. 10W is probably enough.
Also, if the meter measures Farads, then it should also have that "Delta" button...morzh — 02:38 PM |
|
Philco 91 Restore Code ??
|
| I measured the current through the resistor I am using as a replacement for the speaker field coil and got 40ma. So that...dconant — 02:32 PM |
|
Philco 91 Restore Code ??
|
| No I'm not saying I don't own a DMM. I have a CCC one (Thsinde 18+). I forgot that could read caps. I did purchase a Flu...dconant — 02:28 PM |
|
Philco 91 Restore Code ??
|
| Are you telling me you do not own any decent DMM, that can measure capacitances from a few pF and up? Even todays CCC (C...morzh — 01:44 PM |
|
Restoring Philco 96
|
| Well, selectivity today, with stations disappearing, is not such a problem for TRF as it likely used to be.
Although wh...morzh — 01:42 PM |
|
Philco 91 Restore Code ??
|
| Mike I did that already and can't really get any kind of reading. My little Honeytek A6013L reads 0 on all scales. One s...dconant — 01:38 PM |
|
New member
|
| Well, to be frank, when it comes to radios, especially the older types, a person with no electronic background could be ...morzh — 01:33 PM |
|
Restoring Philco 96
|
| Thanks for mentioning the video you had uploaded. Somehow I missed that post. Just watched your video, and it sounds to ...jrblasde — 01:28 PM |
|
Restoring Philco 96
|
| Joseph
well, for now we will have to get by the video I have made, as the final video would not be made before I get a ...morzh — 01:04 PM |
|
Who's Online
|
There are currently 3423 online users. [Complete List]
» 2 Member(s) | 3421 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
